Standard Features
• Two-Stage Copeland Ultra-Tech scroll compressor
• Quiet two-speed ECM outdoor fan motor
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via Bluetooth indoor board via CoolCloud™ App
• Copeland® ComfortAlert™ built in diagnostics
• Copper tube/enhanced aluminum fin coil – 5mm on 2.0-3.0T
• Color-coded terminal strip for non-communicating set-up
• Only two low-voltage wires required in communication mode
• Factory-installed filter drier
• Factory-installed transformer
• Factory-installed high and low-pressure switches
• High-density foam compressor sound blanket
• Fully charged for 15’ of tubing length
• Ambient temperature sensors
• Ground lug connection
• AHRI Certified – ETL Listed
Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Venturi for increased velocity of airflow
• Heavy-gauge galvanized steel cabinet
• Baked-on powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard with rust-resistant screws.
• Top and side maintenance access
• Single-panel access to controls with space for field-installed accessories
• Service valves with sweat connections and easy-access gauge ports
• When properly anchored, meets the 2020 Florida Building integrity requirements for hurricane-type winds
(Anchor bracket kits available.)
Energy Star Notes
• Proper sizing and installation of equipment is critical to achieving optimal performance. Split system air conditioners and heat pumps must be matched
with appropriate coil components to meet ENERGY STAR® criteria. Ask your contractor for details or visit www.energystar.gov.
• The www.energystar.gov website provides up-to-date system combinations certified to meet ENERGY STAR® requirements.
1. Line sizes denoted for 25’ line sets, tested and rated in accordance with ARI Standard 210/240. For other line set lengths or sizes, refer to
the Installation Instructions and/or the Long Line Set Applications guide.
2. Installer will need to supply ¾” to ⅞” adapters for suction line connections.
3. Installer will need to supply ⅞” to 1⅛” adapters for suction line connections.
4. Unit is factory charged with refrigerant for 15’ of ⅜” liquid line. System charge must be adjusted per the Final Charge Adjustment
procedure found in the Installation Instructions.
5. Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes
6. Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
GSXC706010
Model | GSXC706010 |
Cooling Capacity | |
Nominal Cooling (BTU/h) | 60,000 |
Decibels (High/Low) | 75 |
Compressor | |
RLA | 22.9 |
LRA | 147.2 |
STAGE | Two |
TYPE | Scroll |
Condenser Fan Motor | |
Motor Type | ECM |
Horsepower (RPM) | ⅓ |
FLA | 2.8 |
Refrigeration System | |
Refrigerant Line Size¹ | |
Liquid Line Size (“O.D.) | ⅜” |
Suction Line Size (“O.D.) | 1⅛” |
Refrigerant Connection Size | |
Liquid Valve Size (“O.D.) | ⅜” |
Suction Valve Size (“O.D.”) 2, 3 | ⅞” |
Valve Connection Type | Sweat |
Refrigerant Charge4 | 209 |
Expansion Device | TXV |
Electrical Data | |
Voltage-Phase-Hz | 208/230-1 |
Minimum Circuit Ampacity 5 | 34.8 |
Max. Overcurrent Protection 6 | 60 |
Min / Max Volts | 197 / 253 |
Electrical Conduit Size | ½” or ¾” |
Equipment Weight (lbs) | 283 |
Ship Weight (lbs) | 305 |
ENERGY STAR® Certified ^ | YES |
Product Documents
Product Documents
$4,012.00
Out of stock