5 Ton 14 SEER2 Goodman AC Split System GSXN406010+AMST60DU1400
Standard Features
• Energy-Efficient Compressor
• Copper tube/ enhanced aluminum fin coil-5mm diameter on 1.5-4.0T
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed
Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
GSXN406010
Model | GSXN406010 |
Capacities | |
Nominal Cooling (BTU/h) | 60,000 |
Decibels (dBA) | 75 |
Compressor | |
RLA | 25.6 |
LRA | 150 |
Stage | Single |
Type | Scroll |
Condenser Fan Motor | |
Motor Type | PSC |
Horsepower | 1/4 |
FLA | 1.3 |
Refrigeration System | |
Refrigerant Line Size | |
Liquid Line Size (“O.D.) | ⅜” |
Suction Line Size (“O.D.) | ⅞” |
Refrigerant Connection Size | |
Liquid Valve Size (“O.D.) | ⅜” |
Suction Valve Size | ⅞” |
Valve Type | Sweat |
Refrigerant Charge | 181 |
Electrical Data | |
Voltage-Phase (60 Hz) | 208/230-1 |
Minimum Circuit Ampacity | 33.3 |
Max. Overcurrent Protection | 50 |
Min / Max Volts | 197/253 |
Electrical Conduit Size | ½” or ¾” |
Equipment Weight (lbs) | 260 |
Ship Weight (lbs) | 282 |
Product Features
• Internal factory-installed thermal expansion valves for cooling and heat pump applications
• Direct drive, multi-speed ECM blower motor
• All-aluminum evaporator coil
• Coil mounting track for quick repositioning
• Optimized for use with R-410A refrigerant
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard193
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Horizontal or vertical configuration capabilities
• 21” depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce con- densation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater kits available
AMST60DU1400
Model | AMST60DU14* |
Nominal Ratings | 60,000 |
Cooling (Btu/h) | |
Blower | |
Diameter | 11″ |
Width | 10″ |
Coil Connections | |
Liquid | 3/8″ |
Suction | 7/8″ |
Coil Drain Connect (FPT) | 3/4” |
Electrical Data | |
Voltage | 208/230 |
Minimum Circuit Ampacity | 8.6/8.6 |
Max. Overcurrent Device (Amps) | 15/15 |
Minimum VAC | 197 |
Maximum VAC | 253 |
Blower Motor | |
Full Load Amps (FLA) | 6.9 |
Horsepower (HP) | ¾ |
Ship Weight (Lbs.) | 167 |
AMST60DU1400 Heat Kit Specs
Heater Kit Model | Circuit 1 | Circuit 2 | Single-Point Kit | |||||
Heater Amps | Mininum Circuit Ampacity 208/230 | Max Over Current Protection 208/230 | Heater Amps | Mininum Circuit Ampacity 208/230 | Max Over Current Protection 208/230 | Mininum Circuit Ampacity 208/230 | Max Over Current Protection 208/230 | |
AMST60DU1400 | 0/0 | 8.6/8.6 | 15/15 | |||||
3 KW | 10.8/12.5 | 22/24.3 | 25/25 | |||||
5 KW | 17.3/20 | 30.3/34 | 35/35 | |||||
6 KW | 21.7/25 | 36/39.9 | 40/40 | |||||
8 KW | 28.9/33.3 | 45/50.3 | 45/60 | |||||
10 KW | 34.7/40 | 52/58.6 | 60/60 | |||||
15 KW | 40 | 58.6 | 60 | 20 | 25 | 25 | 83.6 | 90 |
Product Documents
$4,334.00
Out of stock