2.5 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH33041

2.5 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH33041

A packaged heat pump with a capacity of 2.5 tons can effectively and sustainably regulate the temperature in your home or commercial space. These units combine the indoor and outdoor components of a traditional split-system heat pump into a single, compact design, making them simpler to install and eliminating the need for external fans or ductwork.

In heating mode, the heat pump absorbs heat from the outside air or ground using a refrigerant, which it then releases inside to increase the temperature. In cooling mode, the heat pump uses the same refrigerant and a component called a reversing valve to draw heat from the indoor air and release it outside, lowering the temperature inside.

Packaged heat pumps, such as a 2.5 ton unit, can serve as a good alternative to central air systems or gas furnaces, especially for those seeking a single, energy-efficient system for both heating and cooling. These heat pumps offer the convenience and energy-saving benefits of a packaged system, particularly in warmer climates and during the heating season when traditional heating systems may not be needed as frequently. They are also a quietly operating solution for your heating and cooling needs.

Standard Features
• Energy-efficient scroll compressor
• Multi-speed ECM indoor blower motor
• Quiet horizontal discharge
• All-aluminum evaporator coil
• Copper tube/aluminum fin condenser coil
• Totally enclosed, permanently lubricated condenser fan motor
• Fully charged system
• Electric heat kit available as a field-installed option
• AHRI certified; ETL listed

Cabinet Features
• Heavy-gauge galvanized-steel cabinet with architectural gray powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Fully insulated blower compartment with convenient access panels
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
• Louvered condenser coil protection
• One footprint for all tonnages
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)


Cooling Capacity
Total BTU/h 27,800
Sensible BTU/h 21,934
SEER2/EER2 13.4 / 10.6
AHRI Numbers 208842405
Heating Capacity
BTU/h (47°F) 27,600
C.O.P. (47°F) 3.54
BTU/h (17°F) 15,400
C.O.P. (17°F) 2.38
HSPF2 6.70
Evaporator Motor
Type ECM
Wheel (D x W) 10 x 8
Cooling CFM3 1,050
Fan-Only CFM 581
No. of Speeds 5
Horsepower - RPM 1/2 - 1050
Evaporator Coil
Face Area (ft2) 5.26
Rows Deep 3
Fins per Inch 14
Metering Device Type Piston
Drain Size (NPT) ¾"
Refrigerant Charge (oz.) 105
Condenser Fan
Horsepower - RPM 1/6 - 810
Fan Diameter 22
# Fan Blades 3
Condenser Coil
Face Area (ft2) 13.37
Rows Deep 1
Fins per Inch 24
Metering Device Type Piston
Quantity 1
Type Scroll
Stage Single
Sound Power dBA 76
Electrical Data
Compressor RLA/LRA 14.1 / 73
Voltage/Phase (60 Hz) 208-230 / 1
Indoor Blower FLA 3.8
Outdoor Fan FLA 0.95
M.C.A.1 22.4
M.O.P.2 35
Operating Weight (lbs) 315
Ship Weight (lbs) 324



Frequently Bought Together

SQRPCH101 Small H Chassis Goodman Package Unit Duct Adapter

Prostat Non-Programmable Thermostat 2 Heat / 1 Cool Conventional or Heat Pump PRS3210


Out of stock


Scroll to Top