2.5 Ton 16 SEER Goodman A/C Straight Cool System GSX160301+ASPT37C14 Install Kit 30' Line Set

$2,461.70
Call for Availability

Out of stock

Compare

Description

Install Kit Includes:

* 30′ Copper Insulated Line Set
* Drain Float Switch
* 6′ Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad 
* Digital Thermostat
* Heat Strip up to 10 kw


Standard Features

• Energy-efficient compressor

• Factory-installed filter drier

• Fully charged for 15’ of tubing length

• Copper tube/aluminum fin coil

• Service valves with sweat connections and easy-to-access gauge ports

Contactor with lug connection

• Ground lug connection

AHRI Certified

• ETL Listed

Cabinet Features

• Heavy-gauge galvanized-steel cabinet with a louvered sound control top

• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval

• Wire fan discharge grille

• Steel louver coil guard

• Single-panel access to controls with space provided for field-installed accessories

• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for
hurricane-type winds

(Anchor bracket kits available.)

 GSX160301
Capacities 
Nominal Cooling (BTU/h)29,000
SEER16
Decibels71.5
Compressor 
RLA12.8
LRA64
Condenser Fan Motor 
Horsepower1/6
FLA0.95
Refrigeration System 
Refrigerant Line Size ¹ 
Liquid Line Size (“O.D.)⅜”
Suction Line Size (“O.D.)⅞”
Refrigerant Connection Size 
Liquid Valve Size (“O.D.)⅜”
Suction Valve Size (“O.D.)⅞”
Valve TypeSweat
Refrigerant Charge78
Electrical Data 
Voltage-Phase (60 Hz)208/230-1
Minimum Circuit Ampacity ²17.0
Max. Overcurrent Protection ³25
Min / Max Volts197/253
Electrical Conduit Size½” or ¾”
Equipment Weight (lbs)149
Ship Weight (lbs)167
ENERGY STAR® Certified Yes

Product Features

• Internal factory-installed thermal expansion valves for cooling and heat pump applications

• Direct drive, multi-speed ECM blower motor

• All-aluminum evaporator coil

• Coil mounting track for quick repositioning

• Optimized for use with R-410A refrigerant

• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in

accordance with ASHRAE standard 193

• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in

accordance with ASHRAE standard 193

• AHRI certified; ETL listed

• Rigid SmartFrame™ cabinet

• Horizontal or vertical configuration capabilities

• 21” depth for easier attic access

• DecaBDE-free thermoplastic drain pan with secondary drain connections

• Screw-less sides and back helps to reduce condensation when installed in humid locations

• Foil-faced insulation covers the internal casing to reduce cabinet condensation

• Galvanized, leather grain-embossed finish

• Glue-less cabinet insulation retention

• Tool-less filter access

• Field Installed 3 kW – 25 kW electric heater

kits available

 ASPT37C14
Nominal Ratings36,000
Cooling (Btu/h)
Blower 
Diameter10⅝”
Width8″
Coil Connections 
Liquid⅜”
Suction⅞”
Coil Drain Connect (FPT)¾”
Electrical Data 
Voltage208/230
Minimum Circuit Ampacity5.6 / 5.6
Max. Overcurrent Device (Amps)15 / 15
Minimum VAC197
Maximum VAC253
Blower Motor 
Full Load Amps (FLA)4.5
Horsepower (HP)¾
Ship Weight (Lbs.)144

HVAC Warehouse