2.5 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160301 & ASPT37C14 Install Kit | HVAC Warehouse

2.5 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160301 & ASPT37C14 Install Kit

$2,963.31

Clear

-

$2,963.31

Clear

-

Compare

Description

Install Kit Includes:

* 30′ Copper Insulated Line Set
* Drain Float Switch
* 6′ Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad 
* Digital Thermostat
* Heat Strip up to 10 kw

Standard Features

  • High-efficiency scroll compressor
  • SmartShift® technology to       ensure quiet reliable defrost
  • Single-speed ECM condenser fan motor
  • Factory-installed bi-flow liquid-line filter drier
  • Factory-installed suction-line accumulator
  • Factory-installed compressor crankcase heater
  • Factory-installed high-capacity muffler
  • High- and low-pressure switches
  • Service valves with sweat connections and easy access to gauge ports
  • Copper tube/enhanced aluminum fin coil
  • Fully charged for 15’ of tubing length
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified; ETL Listed

Cabinet Features

  • Goodman® brand sound control top design
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
  • Top and side maintenance access
  • Service ports and controls are accessible while unit is operating
  • When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds
GSZ160301
Nominal Capacities
Cooling (BTU/h) 30,000
Heating (BTU/h) 30,000
Decibels 75
Compressor
RLA 13.4
LRA 72.5
Type Scroll
Condenser Fan Motor
Horsepower 1/6
FLA 1.1
Refrigeration System

Refrigerant Line Size¹

Liquid Line Size (“O.D.) 3/8″
Suction Line Size (“O.D.) 3/4″
Refrigerant Connection Size
Liquid Valve Size (“O.D.) 3/8″
Suction Valve Size (“O.D.) 7/8”
Valve Connection Type Sweat
Refrigerant Charge (oz.) 160
Electrical Data
Volts/Phase (60 Hz) 208/230
Minimum Circuit Ampacity ² 18.0
Max. Overcurrent Protection ³ 30
Min / Max Volts 197/253
Electrical Conduit Size 1/2″ or 3/4″
Unit Weights
Equipment Weight 186
Shipping Weight 206

Product Features

-Internal factory-installed thermal expansion                   – Rigid SmartFrame™ cabinet

valves for cooling and heat pump applications                   – Horizontal or vertical configuration capabilities

-Direct drive, multi-speed ECM blower motor                     -21” depth for easier attic access

-Coil mounting track for quick repositioning                       – DecaBDE-free thermoplastic drain

-Optimized for use with R-410A refrigerant                          pan with secondary drain connection

-Cabinet air leakage less than 2.0%                                  – Screw-less sides and back helps

at 1.0 inch H₂O when tested in                                          to reduce condensation when

accordance with ASHRAE standard 193                               installed in humid locations

-Cabinet air leakage less than 1.4%                                  – Foil-faced insulation covers the internal

at 0.5 inch H₂O when tested in                                           casing to reduce cabinet condensation

accordance with ASHRAE standard 193                               -Galvanized, leather grain-embossed finish

-AHRI certified; ETL listed                                                  -Glue-less cabinet insulation retention

-Tool-less filter access

-Field Installed 3 kW – 25 kW electric heater

kits available

ASPT37C14
Nominal Ratings
Cooling (Btu/h)  36,000
Blower
Diameter  10⅝”
Width 8″
Coil Connections
Liquid  ⅜”
Suction ⅞”
Coil Drain Connect (FPT) ¾”
Electrical Data
Voltage  208/230
Minimum Circuit Ampacity 5.6 / 5.6
Max. Overcurrent Device (Amps) 15 / 15
Minimum VAC 197
Maximum VAC 253
Blower Motor
Full Load Amps (FLA)  4.5
Horsepower (HP) ¾
Ship Weight (Lbs.) 144

Additional information

Tonnage

SEER

Heat Strip KW

, ,

HVAC Warehouse