- You cannot add "3 Ton 14 SEER Goodman HEAT PUMP Condenser GSZ140361 R410a" to the cart because the product is out of stock.
STOREWIDE SALE ADD TO CART TO SEE SAVINGS
2.5 Ton Goodman 14.5 SEER R410A 96% AFUE 80,000 BTU Two-Stage Variable Speed Horizontal Gas Furnace Split System
Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections
and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space
provided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurri-
cane-type winds (Anchor bracket kits available.)
GSX140301 | |
Capacities Max Cooling (BTU/h)
|
30,000 |
SEER/EER | 14 / 12.0 |
Decibels | 74 |
Compressor | |
RLA | 12.8 |
LRA | 64 |
Condenser Fan Motor |
|
Hp | 1/6 |
FLA | 0.95 |
Refrigeration System Refrigerant Line Size ¹
|
|
Liquid Line Size (“O.D.) | ⅜” |
Suction Line Size (“O.D.) | ¾” |
Refrigerant Connection Size Liquid Valve Size (“O.D.) | ⅜” |
Suction Valve Size (“O.D.) ² ³ | ¾” |
Valve Type | Sweat |
Charge | 80 |
Included piston: | 0.065 |
Electrical Data |
|
Voltage-Phase (60 Hz) | 208/230-1 |
Minimum Circuit Ampacity ⁴ | 17 |
Max. Overcurrent Protection | 25 amps |
Min/Max Volts | 197/253 |
Conduit | ½” or ¾” |
Equipment Weight Shipping Weight |
162 180 |
Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with
R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump
applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed
Model | Cabinet Dimensions | Plenum | Nominal Tons | Connection | Piston Size² | Ship Weight (lbs) | ||||
D | W | H | D | H | Liquid | Suction | ||||
CHPF3636B6 | 21⅛” | 26″ | 17½” | 19″ | 16½” | 3 | ⅜” | ¾” | 0.074 | 50 |
Standard Features
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet
application
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Two-stage gas valve provides quiet, economical heating
• Durable Silicon Nitride igniter
• Quiet two-speed induced draft blower
• Compatible with any single-stage thermostat
• Self-diagnostic control board with constant memory fault code history output to a triple
7-segment display
• Color-coded low-voltage terminals with provisions for
electronic air cleaner
• Efficient and quiet variable-speed airflow system gently ramps up or down according to heating
or cooling demand
• Multiple continuous fan speed options offer quiet air circulation
• Auto-Comfort and enhanced dehumidification modes available
• All models comply with California 40 ng/J Low NOx emissions standard
• For installation in California’s South Coast Air Quality Management District (SCAQMD) only:
This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to
a mitigation fee of up to
$450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program:
www.CleanAirFurnaceRebate.com.
Cabinet Features
• Designed for multi-position installation — upflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy to install top venting with optional side venting
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side-return with easy-cut tabs for effortless removal in bottom
air-inlet applications
GMVC960803BN | |
Heating Data | |
High Fire Input¹ | 80,000 |
High Fire Output¹ | 76,800 |
Low-Fire Steady-State Input¹ | 56,000 |
Low-Fire Steady-State Output¹ | 53,760 |
AFUE² | 96 |
Temperature Rise Range (°F) | 35 – 65 |
Vent Diameter³ | 2″ – 3″ |
No. of Burners | 4 |
Circulator Blower | |
Available AC @ 0.5″ ESP | 1.5 – 3 |
Size (D x W) | 11″ x 8″ |
Horsepower @ 1075 RPM | ½ |
Speed | VS ECM |
Electrical Data | |
Min. Circuit Ampacity⁴ | 7.8 |
Max. Overcurrent Device (amps)⁵ | 15 |
Shipping Weight (lbs) | 120 |
$3,987.00
Out of stock