STOREWIDE SALE ADD TO CART TO SEE SAVINGS
2.5 Ton Goodman 14.5 SEER2 80% AFUE 60K BTU UPFLOW Gas Furnace GM9S800603BN & GSXN403010 & CAPFA3626B6
GM9S800603BN | GSXN403010 | CAPFA3626B6 | |||||
Heating Capacity | Capacities | Unit Dimensions | |||||
Input | 60,000 | Nominal Cooling (BTU/h) | 30,000 | W | 17½" | ||
Natural Gas Output | 48,000 | Decibels (dBA) | 72.0 | D | 21" | ||
LP Gas Output | 48,000 | Compressor | H | 26" | |||
AFUE ¹ | 80 | RLA | 11.6 | A | 22" | ||
Available AC @ 0.5” ESP | 3 | LRA | 59 | Nominal Tons | 3 | ||
Temperature Rise Range (°F) | 20-50 | Stage | Single | Connection | |||
Circulator Blower | Type | Rotary | Liquid | ⅜” | |||
Size (D x W) | 10" x 8" | Condenser Fan Motor | Suction | 7/8” | |||
Horsepower @1075 RPM | 0.5 | Motor Type | PSC | Piston Size | 0.065 | ||
Speed | 9 | Horsepower | 1/6 | Ship Weight (lbs) | 47 | ||
Vent Diameter ² | 4" | FLA | 0.95 | ||||
No. of Burners | 3 | Refrigeration System | |||||
Electrical Data | Refrigerant Line Size | ||||||
Min. Circuit Ampacity ³ | 8.7 | Liquid Line Size (“O.D.) | ⅜" | ||||
Max. Overcurrent Device (amps) ⁴ | 15 | Suction Line Size (“O.D.) | ⅞" | ||||
Ship Weight (lbs) | 100 | Refrigerant Connection Size | |||||
Liquid Valve Size (“O.D.) | ⅜" | ||||||
Suction Valve Size (“O.D.) | ⅞" | ||||||
Valve Type | Sweat | ||||||
Refrigerant Charge | 79 | ||||||
Electrical Data | |||||||
Voltage-Phase (60 Hz) | 208/230-1 | ||||||
Minimum Circuit Ampacity | 15.5 | ||||||
Max. Overcurrent Protection | 25 | ||||||
Min / Max Volts | 197/253 | ||||||
Electrical Conduit Size | ½" or ¾" | ||||||
Equipment Weight (lbs) | 156 | ||||||
Ship Weight (lbs) | 180 |
GSXN403010
Standard Features
- Energy-Efficient Compressor
- Copper tube/ enhanced aluminum fin coil-5mm diameter on 1.5-4.0T
- Factory-installed filter drier
- Fully charged for 15’ of tubing length
- Service valves with sweat connections and easy-to-access gauge ports
- Contactor with lug connection
- Ground lug connection
- AHRI Certified
- ETL Listed
Cabinet Features
- Removable grille-style top design compliant with UL 60335-2-40
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Steel louver coil guard
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
GM9S800603BN
Standard Features
- Heavy-duty aluminized-steel dual diameter tubular heat exchanger
- Single-stage gas valve
- Durable Hot-surface igniter
- Quiet, single-speed draft induced
- Self-diagnostic control board
- Color-coded low-voltage terminals
- Multi-speed ECM blower motor
- California Low NOx emissions models available
- Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019. AHRI Certified; ETL Listed
Cabinet Features
- GM9S80 -upflow, horizontal left or right
- GC9S80- downflow, horizontal left or right
- Convenient left or right connection for gas and electrical service
- Heavy-gauge steel cabinet with durable baked-enamel finish
- Foil faced insulated heat exchange
CAPFA3626B6
Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT, CAPTA, CHPT, CHPTA models feature factory-installed thermal expansion valves for cooling and heat pump applications
• CAPF, CAPFA, CAUF, CAUFA, CHPF, CSCF models feature a check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21” depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed
$3,223.00
Availability: In stock
-