2.5 Ton Goodman 14 SEER R410A 96% AFUE 60,000 BTU Vertical Gas Furnace Split System

Call for Availability

Out of stock



Standard Features

• Energy-efficient compressor

• Single-speed condenser fan motor

• Factory-installed filter drier

• Copper tube/aluminum fin coil

• Service valves with sweat connections

and easy-access gauge ports

Contactor with lug connection

• Ground lug connection

AHRI Certified; ETL Listed

Cabinet Features

• Heavy-gauge galvanized-steel cabinet with a louvered sound control top

• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval

• Steel louver coil guard

• Top and side maintenance access

• Single-panel access to controls with space

provided for field-installed accessories

• When properly anchored, meets the 2010 Florida

Building Code unit integrity requirements for hurri-

cane-type winds (Anchor bracket kits available.)

Max Cooling (BTU/h)

SEER/EER14 / 12.0
RLA 12.8
Condenser Fan Motor

Refrigeration System Refrigerant Line Size ¹

 Liquid Line Size (“O.D.) ⅜”
Suction Line Size (“O.D.)  ¾”
Refrigerant Connection Size Liquid Valve Size (“O.D.)  ⅜”
Suction Valve Size (“O.D.) ² ³¾” 
Valve TypeSweat 
Included piston:0.065
Electrical Data

Voltage-Phase (60 Hz)208/230-1
 Minimum Circuit Ampacity ⁴ 17
Max. Overcurrent Protection 25 amps 
Min/Max Volts197/253
Conduit½” or ¾”
Equipment Weight
Shipping Weight

Standard Features

• All-Aluminum evaporator coil

• Optimized for use with R-410A refrigerant

• Some models suitable for use with

R-410A or R-22 refrigerant

• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump

• Check flowrator for cooling and heat pump applications

• Vertical and horizontal models available

• 21″ depth for easier attic access

• Foil-faced insulation covers the internal casing to reduce cabinet condensation

• Galvanized, leather grain-embossed finish

• Rust resistant, thermoplastic drain pans featuring a low water-retention design

• DecaBDE-free thermoplastic drain pan with secondary drain connections

• UV-resistant drain pan

• AHRI certified; ETL listed

ModelUnit DimensionsNominal TonsConnectionPiston Size*Ship Weight (lbs)

Standard Features 

• Heavy-duty aluminized-steel tubular heat exchanger

• Stainless-steel secondary heat exchanger

• Single-stage gas valve

• Durable Silicon Nitride igniter

• Quiet single-speed induced draft blower

• Self-diagnostic control board with constant memory fault code history output to a LED

• All models comply with California 40 ng/J Low NOx emissions standard

• For installation in California’s South Coast Air Quality Management District (SCAQMD) only:
This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to
a mitigation fee of up to

$450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program:

• AHRI Certified; ETL Listed

Cabinet Features

• Designed for multi-position installation — GMSS96: upflow, horizontal left or right GCSS96:
downflow, horizontal left or right

• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)

• Easy-to-install top venting with optional side venting — GMSS96/upflow models only

• Convenient left or right connection for gas and electrical service

• Cabinet air leakage (QLeak) ≤ 2%

• Heavy-gauge steel cabinet with durable finish

• Fully insulated heat exchanger and blower section

• Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom
air-inlet applications

Heating Data 
High Fire Input¹60,000
High Fire Output¹57,600
Temperature Rise Range (°F)35 – 65
Vent Diameter³2″ – 3″
No. of Burners3
Circulator Blower 
Available AC @ 0.5″ ESP1.5 – 3
Size  (D x W)10″ x 8″
Horsepower @ 1075 RPM
Filter Size (in²) (Qty)(1) 16 x 25
(side or bottom)
Electrical Data 
Min. Circuit Ampacity⁴9.6
Max. Overcurrent Device (amps)⁵15
Shipping Weight (lbs)114

HVAC Warehouse