2 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH32441

2 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH32441

Packaged heat pumps, such as the two-ton version, are a green and efficient way to control the temperature in your home or business. These units combine both the indoor and outdoor components of a traditional split-system heat pump into one compact design, making them easier to install and eliminating the need for extra fans or ductwork.

In heating mode, the heat pump uses a refrigerant to absorb heat from the outside air or ground and release it inside to raise the temperature. In cooling mode, the heat pump reverses this process by drawing heat from the indoor air and releasing it outside to lower the temperature, using a component called a reversing valve and the same refrigerant used in heating mode.

Packaged heat pumps can be a good alternative to central air systems or gas furnaces, especially for those seeking a single energy-efficient system for both heating and cooling. A two-ton heat pump can provide the benefits of a packaged heat pump, especially in warm climates and during the heating season, when traditional heating systems may not be needed as often. These heat pumps are also a low-noise option for your heating and cooling needs.

Standard Features
• Energy-efficient scroll compressor
• Multi-speed ECM indoor blower motor
• Quiet horizontal discharge
• All-aluminum evaporator coil
• Copper tube/aluminum fin condenser coil
• Totally enclosed, permanently lubricated condenser fan motor
• Fully charged system
• Electric heat kit available as a field-installed option
• AHRI certified; ETL listed

Cabinet Features
• Heavy-gauge galvanized-steel cabinet with architectural gray powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Fully insulated blower compartment with convenient access panels
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
• Louvered condenser coil protection
• One footprint for all tonnages
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)


Cooling Capacity
Total BTU/h 23,400
Sensible BTU/h 18,088
SEER2/EER2 13.4 / 10.6
AHRI Numbers 208842404
Heating Capacity
BTU/h (47°F) 22,800
C.O.P. (47°F) 3.60
BTU/h (17°F) 13,000
C.O.P. (17°F) 2.28
HSPF2 6.70
Evaporator Motor
Type ECM
Wheel (D x W) 10 x 8
Cooling CFM3 875
Fan-Only CFM 685
No. of Speeds 5
Horsepower - RPM 1/2 - 1050
Evaporator Coil
Face Area (ft2) 5.26
Rows Deep 3
Fins per Inch 14
Metering Device Type Piston
Drain Size (NPT) ¾"
Refrigerant Charge (oz.) 105
Condenser Fan
Horsepower - RPM 1/6 - 810
Fan Diameter 22
# Fan Blades 3
Condenser Coil
Face Area (ft2) 13.37
Rows Deep 1
Fins per Inch 24
Metering Device Type Piston
Quantity 1
Type Scroll
Stage Single
Sound Power dBA 76
Electrical Data
Compressor RLA/LRA 12.8 / 58.3
Voltage/Phase (60 Hz) 208-230 / 1
Indoor Blower FLA 3.8
Outdoor Fan FLA 0.95
M.C.A.1 20.8
M.O.P.2 30
Operating Weight (lbs) 315
Ship Weight (lbs) 324



Frequently Bought Together

SQRPCH101 Small H Chassis Goodman Package Unit Duct Adapter

Prostat Non-Programmable Thermostat 2 Heat / 1 Cool Conventional or Heat Pump PRS3210