STOREWIDE SALE ADD TO CART TO SEE SAVINGS

2 Ton 14.3 SEER2 Goodman Heat Pump Split System GSZB402410+AMST24BU1400

2 Ton 14.3 SEER2 Goodman Heat Pump Split System GSZB402410+AMST24BU1400

Standard Features 

• Energy-efficient compressor
• SmartShift® technology to ensure quiet reliable defrost
• Enhanced aluminum fin coil with 5 mm diameter copper tubes in 1.5- to 3.5-ton
• Single-speed PSC condenser fan motor
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections and easy access to gauge ports
• Fully charged for 15’ of tubing length
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed

Cabinet Features

• Removable grille-style top design compliant with UL 60335-2-40
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side maintenance access
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for
hurricane-type winds (Anchor bracket kits available.)

GSZB402410

  GSZB402410
Nominal Capacities  
Cooling (BTU/h) 24,000
Heating (BTU/h) 24,000
Decibels 74
Compressor  
RLA 8.4
LRA 41.2
Stage Single
Type Rotary
Condenser Fan Motor  
Motor Type PSC
Horsepower 1/6
FLA 0.95
Refrigeration System  
Refrigerant Line Size¹  
Liquid Line Size (“O.D.) ⅜"
Suction Line Size (“O.D.) ¾"
Refrigerant Connection Size  
Liquid Valve Size (“O.D.) ⅜"
Suction Valve Size (“O.D.) ¾"
Valve Connection Type Sweat
Refrigerant Charge (oz.) 92
Electrical Data  
Volts/Phase (60 Hz) 208/230
Minimum Circuit Ampacity 2 11.5
Max. Overcurrent Protection 3 15
Min / Max Volts 197/253
Electrical Conduit Size 1/2" or 3/4"
Unit Weights  
Equipment Weight (lbs.) 160
Ship Weight (lbs) 175

¹ Tested and rated in accordance with ARI Standard 210/240
2 Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes
3 Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
Notes
• Always check the S&R plate for electrical data on the unit being installed.
• Installer will need to supply ⅞” to 1⅛” adapters for suction line connections.
• Unit is charged with refrigerant for 15’ of ⅜” liquid line. System charge must be adjusted per Installation Instructions Final Charge Procedure.
• Installation of these units requires the specified TXV Kit to be installed on the indoor coil. THE SPECIFIED TXV IS DETERMINED BY THE OUTDOOR UNIT NOT THE INDOOR COIL.

 

Product Features
• Internal factory-installed thermal expansion valves for cooling and heat pump applications
• Direct drive, multi-speed ECM blower motor
• All-aluminum evaporator coil
• Coil mounting track for quick repositioning
• Optimized for use with R-410A refrigerant
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard193
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Horizontal or vertical configuration capabilities
• 21” depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce con- densation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater kits available

 

AMST24BU1400

  AMST24BU14*
Nominal Ratings
Cooling (Btu/h) 24,000
Blower  
Diameter 10"
Width 6"
Coil Connections  
Liquid 3/8"
Suction 3/4"
Coil Drain Connect (FPT) 3/4”
Electrical Data  
Voltage 208/230
Minimum Circuit Ampacity 5.8/5.8
Max. Overcurrent Device (Amps) 15/15
Minimum VAC 197
Maximum VAC 253
Blower Motor  
Full Load Amps (FLA) 4.6
Horsepower (HP) ¾
Ship Weight (Lbs.) 112

AMST24BU1400 Heat Kit Specs

Heater Kit Model Circuit 1 Circuit 2 Single-Point Kit
  Heater Amps Mininum Circuit Ampacity 208/230 Max Over Current Protection 208/230 Heater Amps Mininum Circuit Ampacity 208/230 Max Over Current Protection 208/230 Mininum Circuit Ampacity 208/230 Max Over Current Protection 208/230
AMST24BU1400 0/0 5.8/5.8 15/15          
3 KW 10.8/12.5 19/21.4 20/25          
5 KW 17.3/20 27/30.8 30/35          
6 KW 21.7/25 32.8/37 35/40          
8 KW 28.9/33.3 41.9/47 45/50          
10 KW 34.7/40 49.1/56 50/60          
15 KW 40 55.8 60 20 25 25 80.8 90

$3,147.00

Availability: In stock

Frequently Bought Together

Goodman HKSX05XC 5 kW Electric Heat Kit for Goodman Air Handlers 208-240/60/1

Goodman HKSX08XC 8 kW Electric Heat Kit for Goodman Air Handlers 208-240/60/1

Goodman HKSX10XC 10 kW Electric Heat Kit for Goodman Air Handlers 208-240/60/1

Goodman HKSC15XB 15 kW Electric Heat Kit with Breaker for Goodman Air Handlers 240/60/1

Prostat Non-Programmable Thermostat 2 Heat / 1 Cool Conventional or Heat Pump PRS3210

60 AMP NON-FUSED DISCONNECT BOX

WIRE WHIP 1/2"X6' #10

Safe-T-Switch SS2 Gen-3

SAFE-T-SWITCH SS3-GEN3

Copper Line Set 3/8'' x 3/4'' With 1/2'' Insulation 30' Length

Copper Line Set 3/8'' x 3/4'' With 1/2'' Insulation 50' Length

-

Scroll to Top