STOREWIDE SALE ADD TO CART TO SEE SAVINGS

2 Ton 14.3 SEER 96% 80 kbtu Vertical Goodman AC Gas Furnace System GSXN402410+CAPFA2422B6+GM9S960803BN

GSXN4024210

Standard Features
• Energy-Efficient Compressor
• Copper tube/ enhanced aluminum fin coil-5mm diameter on 1.5-4.0T
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

GM9S960803BN

Standard Features 
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Single-stage gas valve
• Durable Silicon Nitride igniter
• Quiet single-speed induced draft blower
• Self-diagnostic control board with constant memory fault code history output to a LED
• All models comply with California 40 ng/J Low NOx emissions standard
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
• AHRI Certified; ETL Listed

Cabinet Features
• Designed for multi-position installation —
GM9S96: upflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy-to-install top venting with optional side venting — GM9S96/upflow models only
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications

CAPFA2422B6

Standard Features

• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed

GM9S960803BN GSXN402410 CAPFA2422B6
Heating Capacity Capacities Unit Dimensions
Input 80000 Nominal Cooling (BTU/h) 24,000 W 17½"
Natural Gas Output 76880 Decibels (dBA) 72 D 21"
Compressor H 22"
AFUE ¹ 96 RLA 8.4 A 18"
Available AC @ 0.5” ESP 1.5-3 LRA 41.2 Nominal Tons 2
Temperature Rise Range (°F) 35-65 Stage Single Connection
Circulator Blower Type Rotary Liquid ⅜”
Size  (D x W) 11" x 8" Condenser Fan Motor Suction ¾”
Horsepower @1075 RPM ½ Motor Type PSC Piston Size 0.059
Speed 9 Horsepower Ship Weight (lbs) 45
Vent Diameter ² 2" - 3" FLA 0.7
No. of Burners 4 Refrigeration System
Electrical Data Refrigerant Line Size
Min. Circuit Ampacity 10.3 Liquid Line Size (“O.D.) ⅜"
Max. Overcurrent Device (amps) 15 Suction Line Size (“O.D.) ¾"
Ship Weight (lbs) 118 Refrigerant Connection Size
Liquid Valve Size (“O.D.) ⅜"
Suction Valve Size (“O.D.) ¾"
Valve Type Sweat
Refrigerant Charge 71
Electrical Data
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity 11.2
Max. Overcurrent Protection 15
Min / Max Volts 197/253
Electrical Conduit Size ½" or ¾"
Equipment Weight (lbs) 138
Ship Weight (lbs) 153

 

$3,793.00

Availability: In stock

-

Scroll to Top