2 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160241 & ASPT29B14 R-410a

$2,604.00
Call for Availability

Out of stock

Compare

Description

GSZ160241

Standard Features

• High-efficiency scroll compressor

• SmartShift® technology to ensure quiet reliable defrost

• Single-speed ECM condenser fan motor

• Factory-installed bi-flow liquid-line filter drier

• Factory-installed suction-line accumulator

• Factory-installed compressor crankcase heater

• Factory-installed high-capacity muffler

• High- and low-pressure switches

• Service valves with sweat connections and easy access to gauge ports

• Copper tube/enhanced aluminum fin coil

• Fully charged for 15’ of tubing length

Contactor with lug connection

• Ground lug connection

AHRI Certified; ETL Listed

Cabinet Features

• Goodman® brand sound control top design

• Steel louver coil guard

• Heavy-gauge galvanized-steel cabinet

• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval

• Top and side maintenance access

• Service ports and controls are

accessible while unit is operating

• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for
hurricane-type winds

(Anchor bracket kits available.)

 GSZ160241
Nominal Capacities 
Cooling (BTU/h)24,000
Heating (BTU/h)24,000
Decibels75
Compressor 
RLA10.9
LRA62.9
TypeScroll
Condenser Fan Motor 
Horsepower1/6
FLA1.1
Refrigeration System 
Refrigerant Line Size¹ 
Liquid Line Size (“O.D.)3/8″
Suction Line Size (“O.D.)3/4″
Refrigerant Connection Size 
Liquid Valve Size (“O.D.)3/8″
Suction Valve Size (“O.D.)3/4″
Valve Connection TypeSweat
Refrigerant Charge (oz.)150
Electrical Data 
Volts/Phase (60 Hz)208/230
Minimum Circuit Ampacity ²14.7
Max. Overcurrent Protection ³25
Min / Max Volts197/253
Electrical Conduit Size1/2″ or 3/4″
Unit Weights 
Equipment Weight180
Shipping Weight200
ENERGY STAR® Certified ^ YES

ASPT29B14

Product Features

• Internal factory-installed thermal expansion valves for cooling and heat pump applications

• Direct drive, multi-speed ECM blower motor

• All-aluminum evaporator coil

• Coil mounting track for quick repositioning

• Optimized for use with R-410A refrigerant

• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in

accordance with ASHRAE standard 193

• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in

accordance with ASHRAE standard 193

• AHRI certified; ETL listed

• Rigid SmartFrame™ cabinet

• Horizontal or vertical configuration capabilities

• 21” depth for easier attic access

• DecaBDE-free thermoplastic drain pan with secondary drain connections

• Screw-less sides and back helps to reduce condensation when installed in humid locations

• Foil-faced insulation covers the internal casing to reduce cabinet condensation

• Galvanized, leather grain-embossed finish

• Glue-less cabinet insulation retention

• Tool-less filter access

• Field Installed 3 kW – 25 kW electric heater

kits available

 ASPT29B14
Nominal Ratings24,000
Cooling (Btu/h)
Blower 
Diameter9½”
Width6″
Coil Connections 
Liquid⅜”
Suction⅞”
Coil Drain Connect (FPT)¾”
Electrical Data 
Voltage208/230
Minimum Circuit Ampacity5.8 / 5.8
Max. Overcurrent Device (Amps)15 / 15
Minimum VAC197
Maximum VAC253
Blower Motor 
Full Load Amps (FLA)4.6
Horsepower (HP)¾
Ship Weight (Lbs.)129

 

Additional information

Weight254 lbs

HVAC Warehouse