STOREWIDE SALE ADD TO CART TO SEE SAVINGS
3.5 Ton 14 SEER Goodman HEAT PUMP Split System GSZ140421+ASPT47C14 Install Kit 30′ Line Set
This system is being phased out. Follow the link below to the new SEER2 model.
3.5 Ton 14.5 SEER2 Goodman Heat Pump Split System GSZB404210+AMST42CU1400 (ushvacwarehouse.com)
Install Kit Includes:
- 50′ Copper Insulated Line Set
- Drain Float Switch
- 6′ Electrical Whip
- 60 amp non fused disconnect
- Plastic Condenser Pad
- Digital Thermostat
- Heat Strip up to 10 kw
Standard Features
• High-efficiency scroll compressor
• SmartShift® technology to ensure quiet reliable defrost
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections
and easy access to gauge ports
• Copper tube/enhanced aluminum fin coil
• Fully charged for 15’ of tubing length
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Goodman® brand sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side maintenance access
• Service ports and controls are accessible while unit is operating
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for
hurricane-type winds (Anchor bracket kits available.)
| Nominal Capacities | GSZ140421 |
| Cooling (BTU/h) | 42,000 |
| Heating (BTU/h) | 42,000 |
| Decibels | 75 |
| Compressor | |
| RLA | 16.7 |
| LRA | 109.0 |
| Type | Scroll |
| Condenser Fan Motor | |
| Horsepower | 1/6 |
| FLA | 1.1 |
| Refrigeration System | |
| Refrigerant Line Size¹
Liquid Line Size (“O.D.) |
⅜” |
| Suction Line Size (“O.D.) | 1⅛” |
| Refrigerant Connection Size | |
| Liquid Valve Size (“O.D.) | ⅜” |
| Suction Valve Size (“O.D.) | ⅞” |
| Standard Line Set Length (max. feet) | 80 |
| Long Line Set Length (max. feet) ²
Equivalent Length |
250 |
| Linear Length | 200 |
| Vertical Length (outdoor below indoor) | 80 |
| Vertical Length (outdoor above indoor) | 80 |
| Valve Connection Type | Sweat |
| Refrigerant Charge | 153 |
| Electrical Data | |
| Volts/Phase (60 Hz) | 208-230/1 |
| Minimum Circuit Ampacity ³ | 22.0 |
| Max. Overcurrent Protection ⁴ | 35 |
| Min / Max Volts | 197 / 253 |
| Electrical Conduit Size | ½” or ¾” |
| Unit Weights | |
| Equipment Weight (lbs.) | 191 |
| Ship Weight (lbs) | 207 |
| ENERGY STAR® Certified ^ |
Product Features
-Internal factory-installed thermal expansion valves for cooling and heat pump applications
-Direct drive, multi-speed ECM blower motor
-All-aluminum evaporator coil
-Coil mounting track for quick repositioning
-Optimized for use with R-410A refrigerant
-Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
-AHRI certified; ETL listed
-Tool-less filter access
-Field Installed 3 kW – 25 kW electric heater kits available
-Rigid SmartFrame™ cabinet
-Horizontal or vertical configuration capabilities
– 21” depth for easier attic access
-DecaBDE-free thermoplastic drain pan with secondary drain connections
– Screw-less sides and back helps to reduce condensation when installed in humid locations
-Foil-faced insulation covers the internal casing to reduce cabinet condensation
– Galvanized, leather grain-embossed finish
-Glue-less cabinet insulation retention
| ASPT47C14 | |
| Nominal Ratings | 42,000 |
| Cooling (Btu/h) | |
| Blower | |
| Diameter | 10⅝” |
| Width | 10⅝” |
| Coil Connections | |
| Liquid | ⅜” |
| Suction | ⅞” |
| Coil Drain Connect (FPT) | ¾” |
| Electrical Data | |
| Voltage | 208/230 |
| Minimum Circuit Ampacity | 4.9 / 4.9 |
| Max. Overcurrent Device (Amps) | 15 / 15 |
| Minimum VAC | 197 |
| Maximum VAC | 253 |
| Blower Motor | |
| Full Load Amps (FLA) | 3.9 |
| Horsepower (HP) | ¾ |
| Ship Weight (Lbs.) | 144 |
$3,990.00
-
