STOREWIDE SALE ADD TO CART TO SEE SAVINGS

3.5 Ton 15.2 SEER2 Goodman AC Split System GSXH504210+AMST42CU1400 (Not a Heat Pump)

3.5 Ton 15.2 SEER2 Goodman AC Split System GSXH504210+AMST42CU1400 (Not a Heat Pump)

 

GSXH504210

 

Standard Features
• High-efficiency scroll compressor
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Copper tube/enhanced aluminum fin coil -5mm diameter on 1.5-3.0T
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

GSXH504210

  GSXH504210
Capacities  
Nominal Cooling (BTU/h) 42,000
SEER2 15.2
Decibels (dBA) 72
Compressor  
RLA 177
LRA 110.2
Stage Single
Type Scroll
Condenser Fan Motor  
Motor Type PSC
Horsepower 1/4
FLA 1.30
Refrigeration System  
Refrigerant Line Size ¹  
Liquid Line Size (“O.D.) ⅜"
Suction Line Size (“O.D.) ⅞"
Refrigerant Connection Size  
Liquid Valve Size (“O.D.) ⅜"
Suction Valve Size (“O.D.) 2,3 ⅞"
Valve Type Sweat
Refrigerant Charge 4 177
Electrical Data  
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity 5 23.4
Max. Overcurrent Protection 6 40
Min / Max Volts 197/253
Electrical Conduit Size ½" or ¾"
Equipment Weight (lbs) 260
Ship Weight (lbs) 282
ENERGY STAR® Certified YES

¹ Line sizes denoted for 25’ line sets, tested and rated in accordance with ARI Standard 210/240. For other line set lengths or sizes,
refer to the Installation Instructions and/or the Long Line Set Applications guide.
² Installer will need to supply ¾” to ⅞” adapters for suction line connections.
³ Installer will need to supply ⅞” to 1⅛” adapters for suction line connections.
4 Unit is factory charged with refrigerant for 15’ of ⅜” liquid line. System charge must be adjusted per the Final Charge Adjustment
procedure found in the Installation Instructions.
5 Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes
6 Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.

AMST42CU1400

 

Product Features
• Internal factory-installed thermal expansion valves for cooling and heat pump applications
• Direct drive, multi-speed ECM blower motor
• All-aluminum evaporator coil
• Coil mounting track for quick repositioning
• Optimized for use with R-410A refrigerant
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard193
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Horizontal or vertical configuration capabilities
• 21” depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce con- densation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater kits available

 

AMST42CU1400

AMST42CU1400
Nominal Ratings
Cooling (Btu/h) 42,000
Blower
Diameter 10"
Width 8"
Coil Connections
Liquid 3/8"
Suction 3/4”
Coil Drain Connect (FPT) 3/4”
Electrical Data
Voltage 208/230
Minimum Circuit Ampacity 5.9/5.9
Max. Overcurrent Device (Amps) 15/15
Minimum VAC 197
Maximum VAC 253
Blower Motor
Full Load Amps (FLA) 4.7
Horsepower (HP) ¾
Ship Weight (Lbs.) 153

AMST42CU1400 Heat Kit Specs

Heater Kit Model Circuit 1 Circuit 2 Single-Point Kit
  Heater Amps Mininum Circuit Ampacity 208/230 Max Over Current Protection 208/230 Heater Amps Mininum Circuit Ampacity 208/230 Max Over Current Protection 208/230 Mininum Circuit Ampacity 208/230 Max Over Current Protection 208/230
AMST42CU1400 0/0 5.9/5.9 15/15          
3 KW 10.8/12.5 19/21.5 20/25          
5 KW 17.3/20 28/30.9 30/35          
6 KW 21.7/25 33/37.1 35/40          
8 KW 28.9/33.3 42/47.5 45/50          
10 KW 34.7/40 49/55.9 50/60          
15 KW 40 55.9 60 20 25 25 80.9 90

$4,010.00

Availability: In stock

Frequently Bought Together

Goodman HKSX05XC 5 kW Electric Heat Kit for Goodman Air Handlers 208-240/60/1

Goodman HKSX08XC 8 kW Electric Heat Kit for Goodman Air Handlers 208-240/60/1

Goodman HKSX10XC 10 kW Electric Heat Kit for Goodman Air Handlers 208-240/60/1

Goodman HKSC15XB 15 kW Electric Heat Kit with Breaker for Goodman Air Handlers 240/60/1

Safe-T-Switch SS2 Gen-3

60 AMP NON-FUSED DISCONNECT BOX

WIRE WHIP 3/4"X6' #8

Prostat Non-Programmable Thermostat 1 Heat / 1 Cool Conventional or Heat Pump

-

Scroll to Top