3 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH33641

Packaged heat pumps are a type of heat pump that contain both the indoor and outdoor components in a single unit. These systems do not require the installation of an outdoor unit, making them more compact and easier to install than traditional split-system heat pumps, which have a separate indoor unit and outdoor unit. Packaged heat pump units are also a good choice for those who want to make their home comfortable without the need for increased noise, fans or ductwork.

In heating mode, packaged heat pumps extract waste heat from the air or ground outside and transfer it inside to raise the temperature in the building. This is done using a liquid refrigerant that absorbs heat as it evaporates and releases it as it condenses. In cooling mode, packaged heat pumps draw heat from the indoor air and release it outdoors to effectively lower the temperature in the building. This process is reversed using a component called a reversing valve, and it is done using the same liquid refrigerant that is used in heating mode.

Packaged heat pumps can be used as an alternative to traditional central air systems or gas furnaces, providing both heating and cooling in a single system with increased efficiency. They are a good choice for those who want a single system for both heating and cooling and are looking for a more sustainable and energy-efficient solution. Packaged heat pumps are a good option for those who want a single system for both heating and cooling. They are particularly effective in warmer climates and during the heating season, when temperatures are high and traditional heating systems, such as a gas furnace, may not be needed as frequently.


3 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH33641

Standard Features
• Energy-efficient scroll compressor
• Multi-speed ECM indoor blower motor
• Quiet horizontal discharge
• All-aluminum evaporator coil
• Copper tube/aluminum fin condenser coil
• Totally enclosed, permanently lubricated condenser fan motor
• Fully charged system
• Electric heat kit available as a field-installed option
• AHRI certified; ETL listed

Cabinet Features
• Heavy-gauge galvanized-steel cabinet with architectural gray powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Fully insulated blower compartment with convenient access panels
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
• Louvered condenser coil protection
• One footprint for all tonnages
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)


Cooling Capacity
Total BTU/h 35,200
Sensible BTU/h 27,632
SEER2/EER2 13.4 / 10.6
AHRI Numbers 208842406
Heating Capacity
BTU/h (47°F) 32,200
C.O.P. (47°F) 3.70
BTU/h (17°F) 19,400
C.O.P. (17°F) 2.34
HSPF2 6.70
Evaporator Motor
Type ECM
Wheel (D x W) 10 x 8
Cooling CFM3 1,200
Fan-Only CFM 958
No. of Speeds 5
Horsepower - RPM 1/2 - 1050
Evaporator Coil
Face Area (ft2) 6.23
Rows Deep 3
Fins per Inch 14
Metering Device Type Piston
Drain Size (NPT) ¾"
Refrigerant Charge (oz.) 116
Condenser Fan
Horsepower - RPM 1/4 - 830
Fan Diameter 22
# Fan Blades 4
Condenser Coil
Face Area (ft2) 17.02
Rows Deep 1
Fins per Inch 24
Metering Device Type Piston
Quantity 1
Type Scroll
Stage Single
Sound Power dBA 78
Electrical Data
Compressor RLA/LRA 16.7 / 79
Voltage/Phase (60 Hz) 208-230 / 1
Indoor Blower FLA 3.8
Outdoor Fan FLA 1.3
M.C.A.1 26
M.O.P.2 40
Operating Weight (lbs) 375
Ship Weight (lbs) 387



Frequently Bought Together

SQRPCH102-103 Meduim-Large H Chassis Goodman Package Unit Duct Adapter

Prostat Non-Programmable Thermostat 2 Heat / 1 Cool Conventional or Heat Pump PRS3210