- You cannot add "3 Ton 14 SEER Goodman HEAT PUMP Condenser GSZ140361 R410a" to the cart because the product is out of stock.
STOREWIDE SALE ADD TO CART TO SEE SAVINGS
3 Ton 15 SEER2 80% 100 kbtu Vertical Goodman AC Gas Furnace System GSXN403610+GM9S801005CN+CAPTA3626C4
Standard Features
• Energy-efficient compressor
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Wire fan discharge grille
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2017 Florida Building Code unit integrity requirements for
hurricane-type winds
(Anchor bracket kits available.)
Standard Features
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet
application
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Two-stage gas valve provides quiet, economical heating
• Durable Silicon Nitride igniter
• Quiet two-speed induced draft blower
• Compatible with any single-stage thermostat
• Self-diagnostic control board with constant memory fault code history output to a triple
7-segment display
• Color-coded low-voltage terminals with provisions for
electronic air cleaner
• Efficient and quiet variable-speed airflow system gently ramps up or down according to heating
or cooling demand
• Multiple continuous fan speed options offer quiet air circulation
• Auto-Comfort and enhanced dehumidification modes available
• All models comply with California 40 ng/J Low NOx emissions standard
• For installation in California’s South Coast Air Quality Management District (SCAQMD) only:
This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to
a mitigation fee of up to
$450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program:
www.CleanAirFurnaceRebate.com.
Cabinet Features
• Designed for multi-position installation — upflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy to install top venting with optional side venting
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side-return with easy-cut tabs for effortless removal in bottom
air-inlet applications
CAPTA
Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT, CAPTA, CHPT, CHPTA models feature factory-installed thermal expansion valves for cooling and heat pump applications
• CAPF, CAPFA, CAUF, CAUFA, CHPF, CSCF models feature a check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21” depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed
California Residents- Proposition 65
GM9S800603BN | GSXN403010 | CAPFA3626B6 | |||||
Heating Capacity | Capacities | Unit Dimensions | |||||
Input | 60,000 | Nominal Cooling (BTU/h) | 30,000 | W | 17½" | ||
Natural Gas Output | 48,000 | Decibels (dBA) | 72.0 | D | 21" | ||
LP Gas Output | 48,000 | Compressor | H | 26" | |||
AFUE ¹ | 80 | RLA | 11.6 | A | 22" | ||
Available AC @ 0.5” ESP | 3 | LRA | 59 | Nominal Tons | 3 | ||
Temperature Rise Range (°F) | 20-50 | Stage | Single | Connection | |||
Circulator Blower | Type | Rotary | Liquid | ⅜” | |||
Size (D x W) | 10" x 8" | Condenser Fan Motor | Suction | 7/8” | |||
Horsepower @1075 RPM | 0.5 | Motor Type | PSC | Piston Size | 0.065 | ||
Speed | 9 | Horsepower | 1/6 | Ship Weight (lbs) | 47 | ||
Vent Diameter ² | 4" | FLA | 0.95 | ||||
No. of Burners | 3 | Refrigeration System | |||||
Electrical Data | Refrigerant Line Size | ||||||
Min. Circuit Ampacity ³ | 8.7 | Liquid Line Size (“O.D.) | ⅜" | ||||
Max. Overcurrent Device (amps) ⁴ | 15 | Suction Line Size (“O.D.) | ⅞" | ||||
Ship Weight (lbs) | 100 | Refrigerant Connection Size | |||||
Liquid Valve Size (“O.D.) | ⅜" | ||||||
Suction Valve Size (“O.D.) | ⅞" | ||||||
Valve Type | Sweat | ||||||
Refrigerant Charge | 79 | ||||||
Electrical Data | |||||||
Voltage-Phase (60 Hz) | 208/230-1 | ||||||
Minimum Circuit Ampacity | 15.5 | ||||||
Max. Overcurrent Protection | 25 | ||||||
Min / Max Volts | 197/253 | ||||||
Electrical Conduit Size | ½" or ¾" | ||||||
Equipment Weight (lbs) | 156 | ||||||
Ship Weight (lbs) | 180 |
$3,834.00
-