3 Ton 16 SEER 80% 120 kbtu Vertical Goodman AC Gas Furnace System GSX16S361+CAPF4961C6+GMES801205DN | HVAC Warehouse

3 Ton 16 SEER 80% 120 kbtu Vertical Goodman AC Gas Furnace System GSX16S361+CAPF4961C6+GMES801205DN

SKU: GSX16S361+CAPF4961C6+GMES801205DN+TXV Categories , Tags , , ,


Out of stock


Out of stock

SKU: GSX16S361+CAPF4961C6+GMES801205DN+TXV Categories: , Tags: , , ,


Standard Features
• Energy-efficient compressor
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Wire fan discharge grille
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2017 Florida Building Code unit integrity requirements for
hurricane-type winds
(Anchor bracket kits available.)

Nominal Cooling (BTU/h)34,800
Condenser Fan Motor 
Refrigeration System 
Refrigerant Line Size ¹ 
Liquid Line Size (“O.D.)⅜”
Suction Line Size (“O.D.)⅞”
Refrigerant Connection Size 
Liquid Valve Size (“O.D.)⅜”
Suction Valve Size (“O.D.)⅞”
Valve TypeSweat
Refrigerant Charge94
Electrical Data 
Voltage-Phase (60 Hz)208/230-1
Minimum Circuit Ampacity ²18.6
Max. Overcurrent Protection ³30
Min / Max Volts197/253
Electrical Conduit Size½” or ¾”
Equipment Weight (lbs)162
Ship Weight (lbs)180

Standard Features 

• Heavy-duty aluminized-steel dual- diameter tubular heat exchanger
• Single-stage gas valve
• Durable Hot-surface igniter
• Quiet, single-speed draft induced
• Self-diagnostic control board
• Color-coded low-voltage terminals
• Multi-speed ECM blower motor
• California Low NOx emissions models available
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed

Cabinet Features

• Installation:
– GMES80-upflow, horizontal left or right
– GCES80- downflow, horizontal left or right
• Convenient left or right connection
for gas and electrical service
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Foil faced insulated heat exchanger

Heating Capacity 
Natural Gas Output96,000
LP Gas Output96,000
AFUE ¹80
Available AC @ 0.5” ESP5
Temperature Rise Range (°F)40-70
Circulator Blower 
Size  (D x W)11″ x 10″
Horsepower @1075 RPM1
Vent Diameter ²4″
No. of Burners6
Electrical Data 
Min. Circuit Ampacity ³15.3
Max. Overcurrent Device (amps) ⁴20
Ship Weight (lbs)132
ModelUnit DimensionsNominal TonsConnectionPiston Size*Ship Weight (lbs)

Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with
R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed

HVAC Warehouse