STOREWIDE SALE ADD TO CART TO SEE SAVINGS

3 Ton 16 SEER 96% 80 kbtu Horizontal Goodman AC Gas Furnace System GSX16S361+CHPF4860D6+GMVC960804CN

Standard Features
• Energy-efficient compressor
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Wire fan discharge grille
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2017 Florida Building Code unit integrity requirements for
hurricane-type winds
(Anchor bracket kits available.)

GSX16S361
Capacities
Nominal Cooling (BTU/h) 34,800
SEER 16
Decibels 73.5
Compressor
RLA 14.1
LRA 77
Condenser Fan Motor
Horsepower 1/6
FLA 0.95
Refrigeration System
Refrigerant Line Size ¹
Liquid Line Size (“O.D.) ⅜”
Suction Line Size (“O.D.) ⅞”
Refrigerant Connection Size
Liquid Valve Size (“O.D.) ⅜”
Suction Valve Size (“O.D.) ⅞”
Valve Type Sweat
Refrigerant Charge 94
Electrical Data
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity ² 18.6
Max. Overcurrent Protection ³ 30
Min / Max Volts 197/253
Electrical Conduit Size ½” or ¾”
Equipment Weight (lbs) 162
Ship Weight (lbs) 180
ENERGY STAR® Certified NO

 

 

Standard Features 

• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet
application
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Two-stage gas valve provides quiet, economical heating
• Durable Silicon Nitride igniter
• Quiet two-speed induced draft blower
• Compatible with any single-stage thermostat
• Self-diagnostic control board with constant memory fault code history output to a triple
7-segment display
• Color-coded low-voltage terminals with provisions for
electronic air cleaner
• Efficient and quiet variable-speed airflow system gently ramps up or down according to heating
or cooling demand
• Multiple continuous fan speed options offer quiet air circulation
• Auto-Comfort and enhanced dehumidification modes available
• All models comply with California 40 ng/J Low NOx emissions standard
• For installation in California’s South Coast Air Quality Management District (SCAQMD) only:
This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to
a mitigation fee of up to
$450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program:
www.CleanAirFurnaceRebate.com.

Cabinet Features

• Designed for multi-position installation — upflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy to install top venting with optional side venting
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side-return with easy-cut tabs for effortless removal in bottom
air-inlet applications

GMVC960804CN
Heating Data
High Fire Input¹ 80,000
High Fire Output¹ 76,800
Low-Fire Steady-State Input¹ 56,000
Low-Fire Steady-State Output¹ 53,760
AFUE² 96
Temperature Rise Range (°F) 25 – 55
Vent Diameter³ 2″ – 3″
No. of Burners 4
Circulator Blower
Available AC @ 0.5″ ESP 1.5 – 4
Size  (D x W) 11″ x 10″
Horsepower @ 1075 RPM ¾
Speed VS ECM
Electrical Data
Min. Circuit Ampacity⁴ 10.6
Max. Overcurrent Device (amps)⁵ 15
Shipping Weight (lbs) 141

Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with
R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump
applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL list

Model Cabinet Dimensions Plenum Nominal Tons Connection Piston Size² Ship Weight (lbs)
D W H D H Liquid Suction
CHPF4860D6 21⅛” 26″ 24½” 19″ 23½” 4-5 ⅜” ⅞” 0.093 77

e

SKU: GSX16S361+CHPF4860D6+GMVC960804CN+TXV Categories , Tags , , , ,

$4,498.00

Out of stock

Scroll to Top