Start The Year Off With Huge Saving On Goodman's Seer2 Split Systems!

3 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160361 & ASPT37C14 Install Kit 30′ Line Set

(This Product Is Discontinued)

 

Install Kit Includes:

* 30′ Copper Insulated Line Set
* Drain Float Switch
* 6′ Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad 
* Digital Thermostat
* Heat Strip up to 10 kw

 

Standard Features

  • High-efficiency scroll compressor
  • SmartShift® technology to  ensure quiet reliable defrost
  • Single-speed ECM condenser fan motor
  • Factory-installed bi-flow liquid-line filter drier
  • Factory-installed suction-line accumulator
  • Factory-installed compressor crankcase heater
  • Factory-installed high-capacity muffler
  • High- and low-pressure switches
  • Service valves with sweat connections and easy access to gauge ports
  • Copper tube/enhanced aluminum fin coil
  • Fully charged for 15’ of tubing length
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified; ETL Listed

Cabinet Features

  • Goodman® brand sound control top design
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
  • Top and side maintenance access
  • Service ports and controls are  accessible while unit is operating
  • When properly anchored, meets the 2010  Florida Building Code unit integrity  requirements for hurricane-type winds

 

GSZ160361
Nominal Capacities
Cooling (BTU/h) 36,000
Heating (BTU/h) 36,000
Decibels 73
Compressor
RLA 14.1
LRA 72.2
Type Scroll
Condenser Fan Motor
Horsepower 1/4
FLA 1.30
Refrigeration System

Refrigerant Line Size¹

Liquid Line Size (“O.D.) 3/8″
Suction Line Size (“O.D.) 7/8″
Refrigerant Connection Size
Liquid Valve Size (“O.D.) 3/8″
Suction Valve Size (“O.D.) 7/8″
Valve Connection Type Sweat
Refrigerant Charge (oz.) 175
Electrical Data
Volts/Phase (60 Hz) 208/230
Minimum Circuit Ampacity ² 18.9
Max. Overcurrent Protection ³ 30
Min / Max Volts 197/253
Electrical Conduit Size 1/2″ or 3/4″
Unit Weights
Equipment Weight 220
Shipping Weight 240

Product Features

  • Internal factory-installed thermal expansion
  • valves for cooling and heat pump applications
  • Direct drive, multi-speed ECM blower motor
  • All-aluminum evaporator coil
  • Coil mounting track for quick repositioning
  • Optimized for use with R-410A refrigerant
  • Cabinet air leakage less than 2.0%
  • at 1.0 inch H₂O when tested in accordance with ASHRAE standard 19
  • Field Installed 3 kW – 25 kW electric heater kits available
  •  Rigid SmartFrame™ cabinet
  • Horizontal or vertical  configuration capabilities
  •  21” depth for easier attic access to reduce condensation when  installed in humid locations
  •  DecaBDE-free ther  pan with secondary drain connections moplastic drain
  •  Foil-faced insulation covers the internal casing to reduce cabinet condensation
  ASPT37C14
Nominal Ratings
Cooling (Btu/h)  36,000
Blower
Diameter  10⅝”
Width 8″
Coil Connections
Liquid  ⅜”
Suction ⅞”
Coil Drain Connect (FPT) ¾”
Electrical Data
Voltage  208/230
Minimum Circuit Ampacity 5.6 / 5.6
Max. Overcurrent Device (Amps) 15 / 15
Minimum VAC 197
Maximum VAC 253
Blower Motor
Full Load Amps (FLA)  4.5
Horsepower (HP) ¾
Ship Weight (Lbs.) 144

Prop 65 Warning:

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

$4,234.00

-

Scroll to Top