4 Ton 14.5SEER 80% 120 kbtu Horizontal Goodman AC Gas Furnace System GSXN40481+CHPT4860D4+GM9S801205DN


Standard Features
• Energy-Efficient Compressor
• Copper tube/ enhanced aluminum fin coil-5mm diameter on 1.5-4.0T
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)



Standard Features 

• Heavy-duty aluminized-steel dual- diameter tubular heat exchanger
• Single-stage gas valve
• Durable Hot-surface igniter
• Quiet, single-speed draft induced
• Self-diagnostic control board
• Color-coded low-voltage terminals
• Multi-speed ECM blower motor
• California Low NOx emissions models available
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed

Cabinet Features

• Installation:
– GM9S80-upflow, horizontal left or right
– GC9S80- downflow, horizontal left or right
• Convenient left or right connection
for gas and electrical service
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Foil faced insulated heat exchanger 


Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT, CAPTA, CHPT, CHPTA models feature factory-installed thermal expansion valves for cooling and heat pump applications
• CAPF, CAPFA, CAUF, CAUFA, CHPF, CSCF models feature a check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21” depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed


GM9S801205DN GSXN404810 CHPT4860D4
Heating Capacity Capacities Unit Dimensions
Input 120,000 Nominal Cooling (BTU/h) 48,000 W 26”
Natural Gas Output 96,000 Decibels (dBA) 73 D 21⅛"
LP Gas Output 96,000 Compressor H 24½"
AFUE ¹ 80 RLA 19.9 Nominal Tons 3.5-5
Available AC @ 0.5” ESP 5 LRA 110
Temperature Rise Range (°F) 40-70 Stage Single Connection
Circulator Blower Type Scroll Liquid ⅜”
Size  (D x W) 10” x 10” Condenser Fan Motor Suction ⅞"
Horsepower @1075 RPM 1 Motor Type PSC Ship Weight (lbs) 47
Speed 9 Horsepower ¼
Vent Diameter ² 4" FLA 1.3
No. of Burners 6 Refrigeration System
Electrical Data Refrigerant Line Size
Min. Circuit Ampacity ³ 15.3 Liquid Line Size (“O.D.) ⅜"
Max. Overcurrent Device (amps) ⁴ 20 Suction Line Size (“O.D.) ⅞"
Ship Weight (lbs) 132 Refrigerant Connection Size
Liquid Valve Size (“O.D.) ⅜"
Suction Valve Size (“O.D.) ⅞"
Valve Type Sweat
Refrigerant Charge 120
Electrical Data
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity 26.2
Max. Overcurrent Protection 45
Min / Max Volts 197/253
Electrical Conduit Size ½" or ¾"
Equipment Weight (lbs) 226
Ship Weight (lbs) 248



Availability: In stock


Scroll to Top