- You cannot add "4 Ton 14 SEER Goodman HEAT PUMP Condenser GSZ140481 R410a" to the cart because the product is out of stock.
STOREWIDE SALE ADD TO CART TO SEE SAVINGS
4 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160481 & ASPT49D14 R-410a
(This Product Is Discontinued)
Standard Features
• High-efficiency scroll compressor
• SmartShift® technology to ensure quiet reliable defrost
• Single-speed ECM condenser fan motor
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections and easy access to gauge ports
• Copper tube/enhanced aluminum fin coil
• Fully charged for 15’ of tubing length
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Goodman® brand sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side maintenance access
• Service ports and controls are
accessible while unit is operating
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for
hurricane-type winds
(Anchor bracket kits available.)
GSZ160481 | |
Nominal Capacities | |
Cooling (BTU/h) | 48,000 |
Heating (BTU/h) | 48,000 |
Decibels | 74 |
Compressor | |
RLA | 19.9 |
LRA | 109.0 |
Type | Scroll |
Condenser Fan Motor | |
Horsepower | 1/4 |
FLA | 1.30 |
Refrigeration System | |
Refrigerant Line Size¹ | |
Liquid Line Size (“O.D.) | 3/8″ |
Suction Line Size (“O.D.) | 1 1/8″ |
Refrigerant Connection Size | |
Liquid Valve Size (“O.D.) | 3/8″ |
Suction Valve Size (“O.D.) | 7/8″ |
Valve Connection Type | Sweat |
Refrigerant Charge (oz.) | 231 |
Electrical Data | |
Volts/Phase (60 Hz) | 208/230 |
Minimum Circuit Ampacity ² | 26.2 |
Max. Overcurrent Protection ³ | 45 |
Min / Max Volts | 197/253 |
Electrical Conduit Size | 1/2″ or 3/4″ |
Unit Weights | |
Equipment Weight | 250 |
Shipping Weight | 270 |
ENERGY STAR® Certified ^ | Yes |
Product Features
• Internal factory-installed thermal expansion valves for cooling and heat pump applications
• Direct drive, multi-speed ECM blower motor
• All-aluminum evaporator coil
• Coil mounting track for quick repositioning
• Optimized for use with R-410A refrigerant
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in
accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in
accordance with ASHRAE standard 193
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Horizontal or vertical configuration capabilities
• 21” depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater
kits available
ASPT49D14 | |
Nominal Ratings | 48,000 |
Cooling (Btu/h) | |
Blower | |
Diameter | 11¹⁵⁄₁₆” |
Width | 10⅝” |
Coil Connections | |
Liquid | ⅜” |
Suction | ⅞” |
Coil Drain Connect (FPT) | ¾” |
Electrical Data | |
Voltage | 208/230 |
Minimum Circuit Ampacity | 8.6 / 8.6 |
Max. Overcurrent Device (Amps) | 15 / 15 |
Minimum VAC | 197 |
Maximum VAC | 253 |
Blower Motor | |
Full Load Amps (FLA) | 6.9 |
Horsepower (HP) | 1 |
Ship Weight (Lbs.) | 167 |
$4,778.00
-