Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
GSX140601 | |
Capacities
| |
Nom Cool (BTU/h) | 60,000 |
SEER/EER | 14 / 11.7 |
Decibels | 75 |
Compressor | |
RLA | 25 |
LRA | 134 |
Condenser Fan Motor | |
Hp | 1/4 |
FLA | 1.3 |
Refrigeration System
| |
Refrigerant Line Size | |
Liquid Line Size (“O.D.) | ⅜” |
Suction Line Size (“O.D.) | 1⅛” |
Refrigerant Connection Size | |
Liquid Valve Size (“O.D.) | ⅜” |
Suction Valve Size (“O.D.) | ⅞” |
Valve Type | Sweat |
Charge | 120 |
Included piston: | 0.088 |
Electrical Data | |
Voltage-Phase (60 Hz) | 208/230-1 |
Minimum Circuit Ampacity ⁴ | 32.6 |
Max. Overcurrent Protection ⁵ | 50 amps |
Min/Max Volts | 197/253 |
Conduit | ½” or ¾” |
Equipment Weight Shipping Weight | 260 280 |
Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed
Model | Unit Dimensions | Nominal Tons | Connection | Piston Size | Ship Weight (lbs) | |||
W | D | H | Liquid | Suction | ||||
CAPF4961C6 | 21″ | 21⅛” | 30″ | 4-5 | ⅜” | ⅞” | 0.093 | 73 |
Standard Features
• Heavy-duty aluminized-steel dual- diameter tubular heat exchanger
• Single-stage gas valve
• Durable Hot-surface igniter
• Quiet, single-speed draft induced
• Self-diagnostic control board
• Color-coded low-voltage terminals
• Multi-speed ECM blower motor
• California Low NOx emissions models available
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed
Cabinet Features
• Installation:
– GMES80-upflow, horizontal left or right
– GCES80- downflow, horizontal left or right
• Convenient left or right connection
for gas and electrical service
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Foil faced insulated heat exchanger
GMES801005C | |
Heating Capacity | |
Input | 100,000 |
Natural Gas Output | 80,000 |
LP Gas Output | 80,000 |
AFUE ¹ | 80 |
Available AC @ 0.5” ESP | 5 |
Temperature Rise Range (°F) | 35-65 |
Circulator Blower | |
Size (D x W) | 10″ x 10″ |
Horsepower @1075 RPM | 0.75 |
Speed | 5 |
Vent Diameter ² | 4″ |
No. of Burners | 5 |
Electrical Data | |
Min. Circuit Ampacity ³ | 12.45 |
Max. Overcurrent Device (amps) ⁴ | 15 |
Ship Weight (lbs) | 132 |
$3,849.00
Out of stock