STOREWIDE SALE ADD TO CART TO SEE SAVINGS

5 Ton 14 SEER 80% 120 kbtu Vertical Goodman AC Gas Furnace System GSX140601+CAPF4961D6+GM9S801205DN+TXV

GM9S801205DN GSX140601 CAPF4961D6
Heating Capacity Capacities Unit Dimensions
Input 120,000 Nominal Cooling (BTU/h) 60,000 W 24½"
Natural Gas Output 96,000 Decibels (dBA) 75.0 D 21⅛"
LP Gas Output 96,000 Compressor H 30"
AFUE ¹ 80 RLA 25 Nominal Tons 4-5
Available AC @ 0.5” ESP 5 LRA 134 Connection
Temperature Rise Range (°F) 40-70 Stage Single Liquid ⅜”
Circulator Blower Type Scroll Suction ⅞”
Size  (D x W) 10” x 10” Condenser Fan Motor Piston Size 0.093
Horsepower @1075 RPM 1 Motor Type PSC Ship Weight (lbs) 76
Speed 9 Horsepower ¼
Vent Diameter ² 4" FLA 1.3
No. of Burners 6 Refrigeration System
Electrical Data Refrigerant Line Size
Min. Circuit Ampacity ³ 15.3 Liquid Line Size (“O.D.) ⅜"
Max. Overcurrent Device (amps) ⁴ 20 Suction Line Size (“O.D.) ⅞"
Ship Weight (lbs) 132 Refrigerant Connection Size
Liquid Valve Size (“O.D.) ⅜"
Suction Valve Size (“O.D.) ⅞"
Valve Type Sweat
Refrigerant Charge 120
Electrical Data
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity 32.6
Max. Overcurrent Protection 50
Min / Max Volts 197/253
Electrical Conduit Size ½" or ¾"
Equipment Weight (lbs) 260
Ship Weight (lbs) 280

GSX140601

Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections
and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed

Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space
provided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurri-
cane-type winds (Anchor bracket kits available.)

GM9S801205DN

Standard Features 

• Heavy-duty aluminized-steel dual- diameter tubular heat exchanger
• Single-stage gas valve
• Durable Hot-surface igniter
• Quiet, single-speed draft induced
• Self-diagnostic control board
• Color-coded low-voltage terminals
• Multi-speed ECM blower motor
• California Low NOx emissions models available
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed

Cabinet Features

• Installation:
– GM9S80-upflow, horizontal left or right
– GC9S80- downflow, horizontal left or right
• Convenient left or right connection
for gas and electrical service
• Heavy-gauge steel cabinet with
durable baked-enamel finish
• Foil faced insulated heat exchanger 

 

CAPF4961D6

Standard Features

• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed

 

$4,116.00

Availability: Out of stock

Scroll to Top