■ Standard Features
• High-efficiency scroll compressor
• Copper tube/aluminum fin coils
• High- and low-pressure switches
• Contactor with lugs
• High-capacity, steel-cased filter drier
• Heater kits with single-point entry
• 24-volt terminal strip
• Convertible airflow orientation
• Easy to service
• Built-in filter rack with standard 2″ filters
• Bottom utility entry
• AHRI Certified; ETL Listed
• Two-speed blower motor units meet the performance specified in Table 6.8.1A of ASHRAE Standard 90.1-2010
• Two-speed blower motor and two-stage compressor meet the performance specified as of 1/1/2016 in Table 6.8.1-1 of ASHRAE Standard 90.1-2013

■ Cabinet Features
• Heavy-gauge, galvanized-steel cabinet with UV-resistant powder-paint finish
• Full Perimeter Rail
• Sloped drain pan

DCC072***3B***A*
Cooling Capacity
Total BTU/h 71,000
Sensible BTU/h 49,800
EER / IEER 11.2 / 11.4
Decibels 78.0
AHRI Number 6345708
Evaporator Motor / Coil
Motor Type Belt Drive
Wheel (D x W) 1 (11″ x 10″)
Indoor Nominal CFM 2,350
Indoor Motor FLA (Cooling) 5.0
Horsepower – RPM 1.5-1,725
Piston Size (Cooling) 0.094
Filter Size (4) 16″ x 20″ x 2″
Drain Size (NPT) ¾”
R-410A Refrigerant Charge Cir #1(oz.) 146.0
Evaporator Coil Face Area (ft²) 8.9
Rows Deep/ Fins per Inch 4/ 16
Motor Sheave VL44 X 7/8
Blower Sheave AK59 X 1
Belt AX53
Condenser Fan / Coil
Quantity of condenser Fan Motors 1
Horsepower – RPM ⅓ – 1,075
Fan Diameter/ # Fan Blades 22/ 4
Outdoor Nominal CFM 4,200
Face Area (ft²) 19
Rows Deep/ Fins per Inch 2 /27
Compressor
Quantity / Type 1 / Scroll
Stage Single
Compressor RLA / LRA 19/123.0
Electrical Data
Voltage/Phase/ Frequency 208-230/3/60
Quantity of Compressors 1
Belt-Driven Standard Max Static 1.0
Outdoor Fan FLA 1.90
Total Unit Amps 25.9
Min. Circuit Ampacity¹ 31
Max. Overcurrent Protection (amps)² 45
Entrance Power Supply 1.125″
Entrance Control Voltage ½”
Operating Weight (lbs) 640
Ship Weight (lbs) 665