STOREWIDE SALE ADD TO CART TO SEE SAVINGS
Goodman 5 Ton 16.5 SEER A/C Split System GSXC706010+AVPTC61D14 (Not a Heat Pump)
Goodman 5 Ton 16.5 SEER A/C Split System GSXC706010+AVPTC61D14 (Not a Heat Pump)
GSXC706010
Standard Features
• Two-Stage Copeland Ultra-Tech scroll compressor
• Quiet two-speed ECM outdoor fan motor
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via Bluetooth indoor board via CoolCloud™ App
• Copeland® ComfortAlert™ built in diagnostics
• Copper tube/enhanced aluminum fin coil – 5mm on 2.0-3.0T
• Color-coded terminal strip for non-communicating set-up
• Only two low-voltage wires required in communication mode
• Factory-installed filter drier
• Factory-installed transformer
• Factory-installed high and low-pressure switches
• High-density foam compressor sound blanket
• Fully charged for 15’ of tubing length
• Ambient temperature sensors
• Ground lug connection
• AHRI Certified – ETL Listed
Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Venturi for increased velocity of airflow
• Heavy-gauge galvanized steel cabinet
• Baked-on powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard with rust-resistant screws.
• Top and side maintenance access
• Single-panel access to controls with space for field-installed accessories
• Service valves with sweat connections and easy-access gauge ports
• When properly anchored, meets the 2020 Florida Building grity requirements for hurricane-type winds
(Anchor bracket kits available.)
GSXC706010
| GSXC706010 | |
| Cooling Capacity | |
| Nominal Cooling (BTU/h) | 60,000 |
| Decibels (High/Low) | 75 |
| Compressor | |
| RLA | 22.9 |
| LRA | 147.2 |
| STAGE | Two |
| TYPE | Scroll |
| Condenser Fan Motor | |
| Motor Type | ECM |
| Horsepower (RPM) | ⅓ |
| FLA | 2.8 |
| Refrigeration System | |
| Refrigerant Line Size¹ | |
| Liquid Line Size (“O.D.) | ⅜" |
| Suction Line Size (“O.D.) | 1⅛" |
| Refrigerant Connection Size | |
| Liquid Valve Size (“O.D.) | ⅜" |
| Suction Valve Size (“O.D.") 2, 3 | ⅞" |
| Valve Connection Type | Sweat |
| Refrigerant Charge4 | 209 |
| Expansion Device | TXV |
| Electrical Data | |
| Voltage-Phase-Hz | 208/230-1 |
| Minimum Circuit Ampacity 5 | 34.8 |
| Max. Overcurrent Protection 6 | 60 |
| Min / Max Volts | 197 / 253 |
| Electrical Conduit Size | ½" or ¾" |
| Equipment Weight (lbs) | 283 |
| Ship Weight (lbs) | 305 |
| ENERGY STAR® Certified ^ | YES |
^ Energy Star Notes
• Proper sizing and installation of equipment is critical to achieving optimal performance. Split system air conditioners and heat pumps must be matched
with appropriate coil components to meet ENERGY STAR® criteria. Ask your contractor for details or visit www.energystar.gov.
• The www.energystar.gov website provides up-to-date system combinations certified to meet ENERGY STAR® requirements.
¹ Line sizes denoted for 25’ line sets, tested and rated in accordance with ARI Standard 210/240. For other line set lengths or sizes, refer to
the Installation Instructions and/or the Long Line Set Applications guide.
² Installer will need to supply ¾” to ⅞” adapters for suction line connections.
³ Installer will need to supply ⅞” to 1⅛” adapters for suction line connections.
4 Unit is factory charged with refrigerant for 15’ of ⅜” liquid line. System charge must be adjusted per the Final Charge Adjustment
procedure found in the Installation Instructions.
5 Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes
6 Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
AVPTC61D14
Product Features
• Internal factory-installed thermal expansion valves for cooling and heat pump applications
• Variable-speed ECM blower motor
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via on board Bluetooth with the CoolCloud™ phone and tablet application
• Auto configuration of the airflow and tonnage in communicating mode
• Provides constant CFM over a wide range of static pressure conditions independent of duct system
• CFM indicator
• Fault recall of six most recent faults
• Provides adjustable low CFM for
efficient fan-only operation
• Improved humidity and comfort control
• Built-in compatibility with multi-stage heat pump and cooling applications
• All-aluminum evaporator coil
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard193
• Horizontal or vertical configuration capabilities
• 21″ depth for easier attic access
• Deca BDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater kits available
AVPTC61D14
| AVPTC61D14 | |
| Nominal Ratings | |
| Cooling (BTU/h) | 60,000 |
| CFM (High range) | 2025/1630 |
| Blower | |
| Diameter | 11¹⁵⁄₁₆" |
| Width | 10⅝" |
| Coil Drain Connection FPT | ¾" |
| Service Valve | |
| Liquid | ⅜" |
| Suction | ⅞" |
| Electrical Data | |
| Voltage | 208/240 |
| Min Circuit Ampacity | 8.6/8.6 |
| Max. Overcurrent Device (amps) | 15/15 |
| Minimum VAC | 197 |
| Maximum VAC | 253 |
| Blower Motor | |
| FLA | 6.9 |
| HP | 1 |
| Ship Weight (lbs) | 167 |
Product Documents
$5,898.00
Availability: In stock
-
