What is NoX and how does it Affect my Goodman Furnace?

What is NoX and how does it Affect my Goodman Furnace?

While there are many causes of poor furnace performance, the most common is a dirty filter. In fact, approximately 80 percent of all service calls to HVAC technicians are related to dirty filters. If you have been experiencing trouble with your Goodman Furnace, it can be helpful to know that a blocked air filter is often the culprit.

As dust accumulates in your air conditioning system over time, its efficiency will decrease. This results in higher energy bills and compromised indoor air quality for yourself and your family members. A blocked filter can cause particulate matter from construction materials like concrete or drywall to enter the ductwork and circulate through your home’s ventilation system—creating an unsanitary environment where mold can grow easily due to excessive humidity levels caused by poor airflow circulation within its walls (or lack thereof!).

A clean filter is important for efficient operation of your Goodman furnace system.

It’s important to keep your filter clean, as it can save energy and extend the life of your furnace. A dirty filter can reduce airflow by up to 50%, which means that more work has to be done by the blower motor in order for air to be blown through the ductwork. This will cause your system not only to run longer than necessary but also wear down over time. In addition, a dirty filter may prevent air from reaching certain parts within the system (such as coils), resulting in poor performance or even damage from overheating.

It’s equally important that you change out filters regularly–the recommended frequency depends on several factors including how many people live in your home and how often they use their heating systems; however it’s generally recommended that homeowners change filters every three months during winter months and every six months during summer months when heating systems are less active

Clean air filters will save you money on your energy bills and improve the efficiency of your furnace.

Clean air filters will save you money on your energy bills and improve the efficiency of your furnace. A clean filter can reduce the amount of dust, pollen and other contaminants that get into the air ducts of your home. This helps to keep them free from clogs so that they work well for longer periods of time. If you have a dirty filter, it may also prevent moisture from escaping through evaporation which leads to mold growth inside of your furnace’s blower housing unit (BHU).

What is NOx?

NOx is a chemical compound in the Earth’s atmosphere that can contribute to smog and ozone problems. It’s produced when fuel burns, such as when fossil fuels (like oil, natural gas, or propane) are burned in your furnace.

NOx stands for Nitrogen Oxides–a family of gases that includes nitric oxide (NO), nitrogen dioxide (NO2), nitrogen trioxide (N2O3). The amount of NOx present in our atmosphere depends on several factors including: how much fossil fuel we’re burning; how old those fuels are; how cleanly they burn; what kind of equipment we use to burn them with; etc…

What are NOx emissions?

NOx emissions are produced when the combustion process is incomplete. The nitrogen and oxygen in air combine with each other to create nitric oxide (NO), which then combines with more oxygen to form nitrogen dioxide (NO2). NOx emissions are harmful to the environment and can cause health problems for humans, including:

Eye irritation

Asthma attacks

Chronic bronchitis

How does high flue gas temperature cause NOx formation?

NOx formation is a chemical process that occurs when nitrogen and oxygen combine in the combustion chamber. When you burn fuel (like oil, natural gas or propane), it releases heat which raises the temperature of your furnace’s flue gas. If this temperature gets too high, NOx will form inside your Goodman furnace’s combustion chamber and exit through the vent pipe with all other products of combustion.

If you have ever seen dark smoke coming out of your chimney or smelled burnt rubber while using an outdoor grill–you know how unpleasant it can be to breathe these types of emissions! Fortunately for us humans, most modern furnaces have been designed not only so this doesn’t happen but also so that any excess NOx produced by them can be captured by filters before being released into our homes’ indoor air spaces

What is a Nox sensor?

A Nox sensor is a component of the control system, which monitors NOx emissions. The sensor is installed in the flue gas duct and measures NOx content before it exits the furnace. If too much NOx is detected, then combustion air flow is reduced to lower emissions.

The main purpose of installing a Nox sensor on your Goodman furnace is to prevent damage from occurring due to high levels of nitrogen oxides (NOx). This problem could lead to inefficient operation or even complete failure of your furnace if left unchecked for long periods of time

What furnaces must comply with NOx emission standards?

The following is a list of dates when your furnace will be required to meet the new emission standards:

January 1, 2020 – All new furnaces must be certified to meet these low NoX emissions requirements.

January 1, 2022 – All existing and newly installed boilers/furnaces must be equipped with an electronic air cleaner system capable of reducing NOx emissions by at least 85%.

What happens when a furnace has too much Nox?

Excessive NOx emissions can lead to a furnace shutdown. When this happens, the furnace will not be able to operate and provide heat to your home. Furnace shutdowns can result in:

Loss of comfort and efficiency

Increased energy bills

Decreased resale value

NOx is a chemical compound in the Earth’s atmosphere that can contribute to smog and ozone problems.

NOx is a chemical compound in the Earth’s atmosphere that can contribute to smog and ozone problems. NOx is produced by combustion processes, such as those used in power plants and vehicles.

While it is important to understand the effects of this gas on our environment, we should also be aware of how it affects your furnace system.

What are the Factors that affect how much NOx is Produced by a Furnace?

The size of your furnace and its fuel type are two factors that will affect how much NOx is produced by your furnace. The efficiency of your furnace also plays a role in determining how much NOx it produces, as well as other factors such as:

The age of your unit

Your air filter usage and maintenance habits

How does a Two Stage Furnace Reduce NOx?

Two-stage heating means the furnace has two levels of heat output: high for cold winter days and low for milder days. Since the low setting is adequate to meet household heating demands 80% of the time, a two-stage unit runs for longer periods and provides more even heat distribution without sacrificing efficiency.

How does a Variable Speed Furnace Reduce or Eliminate NOx?

While the exact mechanism behind this reduction in NOx emissions is still being studied, it’s believed that a variable speed furnace has a more efficient blower motor than a constant speed motor. This means that less energy is required to run the fan and therefore less carbon dioxide is produced.

Also, due to their design, variable speed furnaces tend to be quieter than constant speed models because they don’t have high-pitched sounds associated with them like some constant-speed units do.

So the Variable Speed Furnace is an Ideal Replacement for an Existing One?

If you have an old, inefficient furnace and you’re thinking about replacing it, a variable speed furnace is an ideal replacement. Here are some of the reasons why:

Variable speed furnaces are more efficient. This means that they use less energy and therefore cost less to run than older models.

Variable speed furnaces are cheaper to run. They also last longer because they’re built with fewer moving parts and rely on electronics instead of mechanical controls (which tend to wear out over time). In addition, they operate quietly so you won’t hear them running when you’re trying to sleep at night or relax in front of the TV after work!

Newer Goodman furnaces produce significantly less Nitrogen Oxide.

Newer Goodman furnaces produce significantly less Nitrogen Oxide. The reason for this is the fact that newer models are more efficient and produce less CO2, which in turn leads to less Nox production.

In addition to being more energy efficient and creating less harmful emissions, it also costs you less money on your monthly bill because your home will stay warm even when it isn’t being used as often.

Scroll to Top