How is a Goodman air conditioner rated?

When you are considering heating and cooling costs and whether or not you are ready for a new HVAC system remember: The Goodman brand has built a solid reputation and is known for producing long lasting, energy efficient HVAC systems. The Goodman HVAC unit has become a highly sought after product. If you are planning to buy a new air conditioning unit for your home, you may have heard of the term SEER rating. SEER is the acronym for Seasonal Energy Efficiency Rating. The SEER rating is the measure of cooling output divided by the energy consumed during a typical cooling season. A higher SEER rating means greater energy efficiency which will save money on utility bills and HVAC repair costs.

ENERGY STAR

When you’re looking for an ENERGY STAR certified air conditioner, you can be sure that it will meet strict energy efficiency guidelines set by the US Environmental Protection Agency (EPA).

To earn the ENERGY STAR label, a product must be independently tested by a third party and meet all of these requirements: Achieves maximum efficiency at or below a specific test condition (for example, cooling mode) when tested in accordance with government-accepted industry test procedures.

Buying an energy efficient model is an important step. The HVAC installation cost can be daunting a time so be sure to remember that the trade off to installation cost is the money saved in the coming future.

SEER VS SEER2

SEER 2.0 is a newer version of the SEER rating system, which stands for Seasonal Energy Efficiency Ratio. SEER 1.0 was developed in 1978 and was used to measure the efficiency of cooling systems until 2013 when it was replaced by SEER 2.0. The new test measures both heating and cooling performance, so you’ll want to pay attention if you live in a climate where you need both types of equipment (like most of us). These ratings are based on two factors: how well your system cools, called cooling capacity; and how much electricity it uses while doing so–its electric heat input rate (EHI). The higher these numbers are, the more efficient your unit will be at providing comfort without wasting energy or costing too much money over time.

SEER 2.0 has two categories for cooling systems: single-stage and two-stage. Single-stage units are less efficient than two-stage ones, but both types are designed to provide comfort in different climates. For example, if you live in an area that gets very hot or cold during certain times of the year, a single-stage unit might be better suited to your needs than a two-stage one would be. It is a more accurate way of measuring the efficiency of your HVAC system than its predecessor, but only if it’s used correctly. The problem is that many people don’t realize how SEER 2.0 works or how to properly calculate their system’s rating.

A good way to think about SEER is that it’s the measure of cooling output divided by energy consumed during a typical cooling season. The higher the SEER number, the more efficient your air conditioner is at keeping cool and using less energy.

There are two types of SEER: a minimum rating (which can be found on all units) and an optional rating for units with an Energy Star logo. If you’re looking for an effective unit that won’t cost too much money in electricity bills, look for a new HVAC unit with an Energy Star-approved rating between 13-20+.

AFUE

AFUE stands for Annual Fuel Utilization Efficiency. This is the measure of how well a heating and cooling system converts fuel to heat.

The higher the AFUE, the more efficient your unit is in converting fuel to heat.

Goodman warranties

Goodman is a brand that has built a solid reputation and is known for producing long lasting, energy efficient AC units. Goodman units are designed to last for years and come with warranties that can be used by homeowners if anything goes wrong with the unit or its parts during operation.

Goodman also offers different types of air conditioners depending on your needs; there are multiple sizes available so you can choose one best suited for your home or office space.

How can I determine my AC unit’s average cost per year?

To determine hvac system costs per year, you will need to know three things:

1) The efficiency rating of your unit. This can be found on its nameplate or in the owner’s manual.

2) The size of the room being cooled by your AC unit, as well as its square footage (in feet). If you don’t have this information readily available, don’t worry–we’ve got some tricks for figuring it out!

3) The average local cost of electricity ($0.1135 per kWh). You can find this figure by searching “average electricity cost” in Google and looking at one of the first results (it should be pulled directly from a government website).

What are the benefits of a higher SEER rating?

Lower utility bills

Lower maintenance costs

Higher resale value

Reduced greenhouse gas emissions

Improved energy efficiency  

Reduced operating costs

The Goodman brand goal

Goodman’s goal is to provide customers with high quality products at affordable prices while also providing excellent customer service so that you are completely satisfied with your purchase!