1.5 Ton 16 SEER Goodman A/C Straight Cool System GSX160181 & ASPT25B14 R410a

$2,075.00

Clear

$2,075.00

Clear
Compare

Description

Standard Features

  • Energy-efficient compressor
  • Factory-installed filter drier
  • Fully charged for 15’ of tubing length
  • Copper tube/aluminum fin coil
  • Service valves with sweat connections  and easy-to-access gauge ports
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified

Cabinet Features

  • Heavy-gauge galvanized-steel cabinet  with a louvered sound control top
  • Attractive Architectural Gray powder-paint  finish  with 500-hour salt-spray approval
  • Wire fan discharge grille
  • Steel louver coil guard
  • Single-panel access to controls with space  provided for field-installed accessories
  • When properly anchored, meets the 2010 Florida Building  Code unit integrity requirements for hurricane-type winds
GSX160181
Capacities
Nominal Cooling (BTU/h) 18,000
SEER 16
Decibels 71.5
Compressor
RLA 9.0
LRA 46
Condenser Fan Motor
Horsepower 1/6
FLA 0.95
Refrigeration System

Refrigerant Line Size ¹

Liquid Line Size (“O.D.) ⅜”
Suction Line Size (“O.D.) ¾”
Refrigerant Connection Size
Liquid Valve Size (“O.D.) ⅜”
Suction Valve Size (“O.D.) ¾”
Valve Type Sweat
Refrigerant Charge 78
Electrical Data
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity ² 12.2
Max. Overcurrent Protection ³ 20
Min / Max Volts 197/253
Electrical Conduit Size ½” or ¾”
Equipment Weight (lbs) 145
Ship Weight (lbs) 163

Product Features

  • Internal factory-installed thermal expansion
  • valves for cooling and heat pump applications
  • Direct drive, multi-speed ECM blower motor
  • All-aluminum evaporator coil
  • Coil mounting track for quick repositioning
  • Optimized for use with R-410A refrigerant
  • Cabinet air leakage less than 2.0%
  • at 1.0 inch H₂O when tested in accordance with ASHRAE standard 19
  • Field Installed 3 kW – 25 kW electric heater kits available
  •  Rigid SmartFrame™ cabinet
  • Horizontal or vertical  configuration capabilities
  •  21” depth for easier attic access to reduce condensation when  installed in humid locations
  •  DecaBDE-free ther  pan with secondary drain connections moplastic drain
  •  Foil-faced insulation covers the internal casing to reduce cabinet condensation
ASPT25B14
Nominal Ratings
Cooling (Btu/h) 24,000
Blower
Diameter 9½”
Width 6″
Coil Connections
Liquid ⅜”
Suction ¾”
Coil Drain Connect (FPT) ¾”
Electrical Data
Voltage 208/230
Minimum Circuit Ampacity 5.8 / 5.8
Max. Overcurrent Device (Amps) 15 / 15
Minimum VAC 197
Maximum VAC 253
Blower Motor
Full Load Amps (FLA) 4.6
Horsepower (HP) ¾
Ship Weight (Lbs.) 116

Additional information

Weight 279 lbs
Manufacturer

Heat Strip KW

, ,

HVAC Warehouse