Start The Year Off With Huge Saving On Goodman's Seer2 Split Systems!


2 Ton 14 SEER Goodman A/C Straight Cool GSX140241 & ARUF29B14 Install Kit 50′

(This Product Is Discontinued)


This system is being phased out. Follow the link below to the new SEER2 model.

2 Ton 14.5 SEER2 Goodman AC Split System GSXN402410+AMST24BU1400 (Not a Heat Pump) (


Install Kit Includes:

* 50′ Copper Insulated Line Set
* Drain Float Switch
* 6′ Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad 
* Digital Thermostat
* Heat Strip up to 10 kw

Standard Features

  • Energy-efficient compressor
  • Single-speed condenser fan motor
  • Factory-installed filter drier
  • Copper tube/aluminum fin coil
  • Service valves with sweat connections and easy-access gauge ports
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified; ETL Listed

Cabinet Features

  • Heavy-gauge galvanized-steel cabinet with a louvered sound control top
  • Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
  • Steel louver coil guard
  • Top and side maintenance access
  • Single-panel access to controls with space provided for field-installed accessories
  • When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Max Cooling (BTU/h) 24,000
SEER/EER 14 / 12
Decibels 74
RLA 7.7
LRA 38.0
Condenser Fan Motor
Hp 1/8
FLA 0.7
Refrigeration System

Refrigerant Line Size ¹

Liquid Line Size (“O.D.) ⅜”
Suction Line Size (“O.D.) ¾”
Refrigerant Connection Size
Liquid Valve Size (“O.D.) ⅜”
Suction Valve Size (“O.D.) ² ³ ¾”
Valve Type Sweat
Charge 72
Included piston: 0.057
Electrical Data
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity ⁴ 10.3
Max. Overcurrent Protection ⁵ 15 amps
Min/Max Volts 197/253
Conduit ½” or ¾”

Product Features

-Check flowrator for cooling and heat pump applications

-Direct drive, multi-speed PSC blower motor

-All-aluminum evaporator coil

-Coil mounting track for quick repositioning

-Cabinet air leakage less than 2.0% at

1.0 inch  H₂O when tested in accordance

with ASHRAE standard 193

-Cabinet air leakage less than 1.4%

at 0.5 inch H₂O when tested in

accordance with ASHRAE standard 193

-AHRI certified; ETL listed

-Tool-less filter access

-Field Installed 3 kW – 25 kW electric heater

kits available

-Rigid SmartFrame™ cabinet

-Horizontal or vertical configuration capabilities

-21″ depth for easier attic access

-DecaBDE-free thermoplastic drain

pan with secondary drain connections

-Screw-less sides and back helps to reduce

condensation when installed in humid locations

-Foil-faced insulation covers the internal

casing to reduce cabinet condensation

-Galvanized, leather grain-embossed finish

-Glue-less cabinet insulation retention

Nominal Ratings
Cooling (Btu/h)  25,000
Piston Size 0.057
Diameter  9½”
Width 6″
Coil Connections
Liquid  ⅜”
Suction ¾”
Coil Drain Connect (FPT) ¾”
Electrical Data
Voltage  208/230
Min Circuit Ampacity 2.2/2.2
Max. Overcurrent Device (Amps) 15/15
Minimum VAC 197
Maximum VAC 253
Blower Motor
Full Load Amps (FLA)  1.75
Horsepower (HP)
Ship Weight (Lbs.) 100



Scroll to Top