2 Ton 15 SEER 96% 60 kbtu Vertical Goodman AC Gas Furnace System GSX140241+CAPF3137B6+GMES960603BN

Out of stock

$2,576.20
Call for Availability

Out of stock

Compare

Description

Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections
and easy-access gauge ports
Contactor with lug connection
• Ground lug connection
AHRI Certified; ETL Listed

Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space
provided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurri-
cane-type winds (Anchor bracket kits available.)

 GSX140241
Capacities

Nom Cool (BTU/h)24,000
SEER/EER14 / 12
Decibels74
Compressor
 
RLA7.7
LRA38
Condenser Fan Motor

Hp1/8
FLA0.7
Refrigeration System     

Refrigerant Line Size 
Liquid Line Size (“O.D.)⅜”
Suction Line Size (“O.D.)¾”
Refrigerant Connection Size 
 Liquid Valve Size (“O.D.)⅜”
Suction Valve Size (“O.D.) ² ³¾” 
Valve TypeSweat
Charge72
Included piston:0.057
Electrical Data
  
Voltage-Phase (60 Hz)208/230-1
Minimum Circuit Ampacity ⁴10.3
Max. Overcurrent Protection ⁵15 amps
Min/Max Volts197/253
Conduit½” or ¾”
Equipment Weight
Shipping Weight
126
141

Standard Features 

• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Single-stage gas valve
• Durable Silicon Nitride igniter
• Quiet single-speed induced draft blower
• Self-diagnostic control board with constant memory fault code history output to a LED
• All models comply with California 40 ng/J Low NOx emissions standard
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed

Cabinet Features

• Designed for multi-position installation — GMES96: upflow, horizontal left or right GCES96:
downflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy-to-install top venting with optional side venting — GMES96/upflow models only
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom
air-inlet applications

 GMES960603B
Heating Data 
High Fire Input¹60,000
High Fire Output¹57,660
AFUE²96
Temperature Rise Range (°F)35-65
Vent Diameter³2″- 3″
No. of Burners3
Circulator Blower 
Available AC @ 0.5″ ESP1.5- 3
Size  (D x W)11″ x 8″
Horsepower @ 1075 RPM1/2
Speed5
Filter Size (in²) (Qty)(1) 16xX 25
(side or bottom)
Electrical Data 
Min. Circuit Ampacity⁴9.6
Max. Overcurrent Device (amps)⁵15
Shipping Weight (lbs)111

Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed

ModelUnit DimensionsNominal TonsConnectionPiston Size*Ship Weight (lbs)
WDHLiquidSuction
CAPF3137B617½”21⅛”30″2½-3⅜”¾”0.07153


HVAC Warehouse