3.5 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160421 & ASPT47D14 Install Kit | HVAC Warehouse

3.5 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160421 & ASPT47D14 Install Kit

$3,610.15

Clear

-

$3,610.15

Clear

-

Compare

Description

Install Kit Includes:

* 50′ Copper Insulated Line Set
* Drain Float Switch
* 6′ Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad 
* Digital Thermostat
* Heat Strip up to 10 kw

Standard Features

  • High-efficiency scroll compressor
  • SmartShift® technology to  ensure quiet reliable defrost
  • Single-speed ECM condenser fan motor
  • Factory-installed bi-flow liquid-line filter drier
  • Factory-installed suction-line accumulator
  • Factory-installed compressor crankcase heater
  • Factory-installed high-capacity muffler
  • High- and low-pressure switches
  • Service valves with sweat connections and easy access to gauge ports
  • Copper tube/enhanced aluminum fin coil
  • Fully charged for 15’ of tubing length
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified; ETL Listed

 Cabinet Features

  • Goodman® brand sound control top design
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
  • Top and side maintenance access
  • Service ports and controls are  accessible while unit is operating
  • When properly anchored, meets the 2010  Florida Building Code unit integrity  requirements for hurricane-type winds
GSZ160421
Nominal Capacities

Cooling (BTU/h)

42,000
Heating (BTU/h)42,000
Decibels73
Compressor

RLA

16.7
LRA109.0
TypeScroll
Condenser Fan Motor

Horsepower

1/4
FLA1.2
Refrigeration System

Refrigerant Line Size¹

Liquid Line Size (“O.D.)

3/8″
Suction Line Size (“O.D.)1 1/8″
Refrigerant Connection Size

Liquid Valve Size (“O.D.)

3/8″
Suction Valve Size (“O.D.)7/8”
Valve Connection TypeSweat
Refrigerant Charge (oz.)180
Electrical Data

Volts/Phase (60 Hz)

208/230
Minimum Circuit Ampacity ²22.1
Max. Overcurrent Protection ³35
Min / Max Volts197/253
Electrical Conduit Size1/2″ or 3/4″
Unit Weights

Equipment Weight

226
Shipping Weight237

Product Features

  • Internal factory-installed thermal expansion
  • valves for cooling and heat pump applications
  • Direct drive, multi-speed ECM blower motor
  • All-aluminum evaporator coil
  • Coil mounting track for quick repositioning
  • Optimized for use with R-410A refrigerant
  • Cabinet air leakage less than 2.0%
  • at 1.0 inch H₂O when tested in accordance with ASHRAE standard 19
  • Field Installed 3 kW – 25 kW electric heater kits available
  •  Rigid SmartFrame™ cabinet
  • Horizontal or vertical  configuration capabilities
  •  21” depth for easier attic access to reduce condensation when  installed in humid locations
  •  DecaBDE-free ther  pan with secondary drain connections moplastic drain
  •  Foil-faced insulation covers the internal casing to reduce cabinet condensation
ASPT47D14
Nominal Ratings42,000
Cooling (Btu/h)
Blower
Diameter10⅝”
Width10⅝”
Coil Connections
Liquid⅜”
Suction⅞”
Coil Drain Connect (FPT)¾”
Electrical Data
Voltage208/230
Minimum Circuit Ampacity5.6 / 5.6
Max. Overcurrent Device (Amps)15 / 15
Minimum VAC197
Maximum VAC253
Blower Motor
Full Load Amps (FLA)4.5
Horsepower (HP)¾
Ship Weight (Lbs.)155

Additional information

SEER

Tonnage

Heat Strip KW

, ,

HVAC Warehouse