3 Ton 14 SEER 80% 40 kbtu Vertical Goodman AC Gas Furnace System GSX140361+CAPF3137B6+GMES800403AN
Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections
and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space
provided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurri-
cane-type winds (Anchor bracket kits available.)
GSX140361 | |
Capacities
|
|
Nom Cool (BTU/h) | 36,000 |
SEER/EER | 14 / 12 |
Decibels | 73 |
Compressor |
|
RLA | 14.1 |
LRA | 77 |
Condenser Fan Motor |
|
Hp | 1/6 |
FLA | 0.95 |
Refrigeration System
|
|
Refrigerant Line Size ¹ | |
Liquid Line Size (“O.D.) | ⅜” |
Suction Line Size (“O.D.) | ⅞” |
Refrigerant Connection Size | |
Liquid Valve Size (“O.D.) | ⅜” |
Suction Valve Size (“O.D.) ² ³ | ¾” |
Valve Type | Sweat |
Charge | 81 |
Included piston: | 0.068 |
Electrical Data |
|
Voltage-Phase (60 Hz) | 208/230-1 |
Minimum Circuit Ampacity ⁴ | 18.6 |
Max. Overcurrent Protection ⁵ | 30 amps |
Min/Max Volts | 197/253 |
Conduit | ½” or ¾” |
Equipment Weight Shipping Weight |
162 180 |
Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with
R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed
Model | Unit Dimensions | Nominal Tons | Connection | Piston Size* | Ship Weight (lbs) | |||
W | D | H | Liquid | Suction | ||||
CAPF3137B6 | 17½” | 21⅛” | 30″ | 2½-3 | ⅜” | ¾” | 0.071 | 53 |
Standard Features
• Heavy-duty aluminized-steel dual- diameter tubular heat exchanger
• Single-stage gas valve
• Durable Hot-surface igniter
• Quiet, single-speed draft induced
• Self-diagnostic control board
• Color-coded low-voltage terminals
• Multi-speed ECM blower motor
• California Low NOx emissions models available
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed
Cabinet Features
• Installation:
– GMES80-upflow, horizontal left or right
– GCES80- downflow, horizontal left or right
• Convenient left or right connection
for gas and electrical service
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Foil faced insulated heat exchanger
GMES800403A | |
Heating Capacity | |
Input | 40,000 |
Natural Gas Output | 32,000 |
LP Gas Output | 32,000 |
AFUE ¹ | 80 |
Available AC @ 0.5” ESP | 3 |
Temperature Rise Range (°F) | 25-55 |
Circulator Blower | |
Size (D x W) | 10″ x 6″ |
Horsepower @1075 RPM | 0.5 |
Speed | 5 |
Vent Diameter ² | 4″ |
No. of Burners | 2 |
Electrical Data | |
Min. Circuit Ampacity ³ | 8.7 |
Max. Overcurrent Device (amps) ⁴ | 15 |
Ship Weight (lbs) | 86 |
Prop 65 Warning:
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
$2,897.00
Out of stock