3 Ton 14 SEER 96% 60 kbtu Vertical Goodman AC Gas Furnace System GSX140361+CAPF3137B6+GMES960603BN

Standard Features

• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections
and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed

Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space
provided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurri-
cane-type winds (Anchor bracket kits available.)



Nom Cool (BTU/h) 36,000
SEER/EER 14 / 12
Decibels 73
RLA 14.1
LRA 77
Condenser Fan Motor

Hp 1/6
FLA 0.95
Refrigeration System     


Refrigerant Line Size ¹
Liquid Line Size (“O.D.) ⅜”
Suction Line Size (“O.D.) ⅞”
Refrigerant Connection Size
 Liquid Valve Size (“O.D.) ⅜”
Suction Valve Size (“O.D.) ² ³ ¾”
Valve Type Sweat
Charge 81
Included piston: 0.068
Electrical Data

Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity ⁴ 18.6
Max. Overcurrent Protection ⁵ 30 amps
Min/Max Volts 197/253
Conduit ½” or ¾”
Equipment Weight
Shipping Weight

Standard Features 

• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Single-stage gas valve
• Durable Silicon Nitride igniter
• Quiet single-speed induced draft blower
• Self-diagnostic control board with constant memory fault code history output to a LED
• All models comply with California 40 ng/J Low NOx emissions standard
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed

Cabinet Features

• Designed for multi-position installation — GMES96: upflow, horizontal left or right GCES96:
downflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy-to-install top venting with optional side venting — GMES96/upflow models only
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom
air-inlet applications

Heating Data
High Fire Input¹ 60,000
High Fire Output¹ 57,660
AFUE² 96
Temperature Rise Range (°F) 35-65
Vent Diameter³ 2″- 3″
No. of Burners 3
Circulator Blower
Available AC @ 0.5″ ESP 1.5- 3
Size  (D x W) 11″ x 8″
Horsepower @ 1075 RPM 1/2
Speed 5
Filter Size (in²) (Qty) (1) 16xX 25
(side or bottom)
Electrical Data
Min. Circuit Ampacity⁴ 9.6
Max. Overcurrent Device (amps)⁵ 15
Shipping Weight (lbs) 111
Model Unit Dimensions Nominal Tons Connection Piston Size* Ship Weight (lbs)
W D H Liquid Suction
CAPF3137B6 17½” 21⅛” 30″ 2½-3 ⅜” ¾” 0.071 53

Standard Features

• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with
R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed

SKU: GSX140361+CAPF3137B6+GMES960603BN+TXV Categories , Tags , , ,


Out of stock

Scroll to Top