4 Ton 14 SEER Goodman HEAT PUMP Split GSZ140481 & ARUF49D14 R410a INSTALL KIT

$3,269.00
Call for Availability

Out of stock

Compare

Description

Install Kit Includes:

* 50′ Copper Insulated Line Set
* Drain Float Switch
* 6′ Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad 
* Digital Thermostat
* Heat Strip up to 10 kw

Standard Features 

• High-efficiency scroll compressor

• SmartShift® technology to ensure quiet reliable defrost

• Factory-installed bi-flow liquid-line filter drier

• Factory-installed suction-line accumulator

• Factory-installed compressor crankcase heater

• Factory-installed high-capacity muffler

• High- and low-pressure switches

• Service valves with sweat connections

and easy access to gauge ports

• Copper tube/enhanced aluminum fin coil

• Fully charged for 15’ of tubing length

Contactor with lug connection

• Ground lug connection

AHRI Certified; ETL Listed

Cabinet Features

• Goodman® brand sound control top design

• Steel louver coil guard

• Heavy-gauge galvanized-steel cabinet

• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval

• Top and side maintenance access

• Service ports and controls are

accessible while unit is operating

• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for
hurricane-type winds (Anchor bracket kits available.)


Product Features

• Check flowrator for cooling and heat pump applications

• Direct drive, multi-speed PSC blower motor

• All-aluminum evaporator coil

• Coil mounting track for quick repositioning

• Cabinet air leakage less than 2.0% at

1.0 inch H₂O when tested in accordance with ASHRAE standard 193

• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in

accordance with ASHRAE standard 193

• AHRI certified; ETL listed

• Rigid SmartFrame™ cabinet

• Horizontal or vertical configuration capabilities

• 21″ depth for easier attic access

• DecaBDE-free thermoplastic drain pan with secondary drain connections

• Screw-less sides and back helps to reduce condensation when installed in humid locations

• Foil-faced insulation covers the internal casing to reduce cabinet condensation

• Galvanized, leather grain-embossed finish

• Glue-less cabinet insulation retention

• Tool-less filter access

• Field Installed 3 kW – 25 kW electric heater

kits available

 GSZ140481
Nominal Capacities 
Cooling (BTU/h)48,000
Heating (BTU/h)48,000
Decibels75
Compressor 
RLA18.5
LRA124.0
TypeScroll
Condenser Fan Motor 
Horsepower1/4
FLA1.30
Refrigeration System 
Refrigerant Line Size¹ 
Liquid Line Size (“O.D.)⅜”
Suction Line Size (“O.D.)1⅛”
Refrigerant Connection Size 
Liquid Valve Size (“O.D.)⅜”
Suction Valve Size (“O.D.)⅞”
Standard Line Set Length (max. feet)80
Long Line Set Length (max. feet) ² 
Equivalent Length250
Linear Length200
Vertical Length (outdoor below indoor)80
Vertical Length (outdoor above indoor)80
Valve Connection TypeSweat
Refrigerant Charge157
Electrical Data 
Volts/Phase (60 Hz)208-230/1
Minimum Circuit Ampacity ³24.4
Max. Overcurrent Protection ⁴40
Min / Max Volts197 / 253
Electrical Conduit Size½” or ¾”
Unit Weights 
Equipment Weight (lbs.)226
Ship Weight (lbs)237
ENERGY STAR® Certified ^ 
ARUF49D14
Nominal Ratings 
Cooling (Btu/h)48,000
Piston Size0.080
Blower 
Diameter10⅝”
Width10⅝”
Coil Connections 
Liquid⅜”
Suction⅞”
Coil Drain Connect (FPT)¾”
Electrical Data 
Voltage208/230
Min Circuit Ampacity4/4
Max. Overcurrent Device (Amps)15/15
Minimum VAC197
Maximum VAC253
Blower Motor 
Full Load Amps (FLA)3.5
Horsepower (HP)½
Ship Weight (Lbs.)145

 

Additional information

Weight254 lbs

HVAC Warehouse