Start The Year Off With Huge Saving On Goodman's Seer2 Split Systems!


5 Ton 14 SEER2 80% 120 kbtu Goodman AC Gas Furnace System

GM9S801205DN GSXN406010 CAPF4961D6
Heating Capacity Capacities Unit Dimensions
Input 120,000 Nominal Cooling (BTU/h) 60,000 W 24½"
Natural Gas Output 96,000 Decibels (dBA) 75.0 D 21⅛"
LP Gas Output 96,000 Compressor H 30"
AFUE ¹ 80 RLA 25.6
Available AC @ 0.5” ESP 5 LRA 150 Nominal Tons 4-5
Temperature Rise Range (°F) 40-70 Stage Single Connection
Circulator Blower Type Scroll Liquid ⅜”
Size  (D x W) 10" x 10'' Condenser Fan Motor Suction ⅞"
Horsepower @1075 RPM 1 Motor Type PSC Piston Size 0.093
Speed 9 Horsepower 1/4 Ship Weight (lbs) 76
Vent Diameter ² 4" FLA 1.3
No. of Burners 6 Refrigeration System
Electrical Data Refrigerant Line Size
Min. Circuit Ampacity ³ 15.3 Liquid Line Size (“O.D.) ⅜"
Max. Overcurrent Device (amps) ⁴ 20 Suction Line Size (“O.D.) ⅞"
Ship Weight (lbs) 132 Refrigerant Connection Size
Liquid Valve Size (“O.D.) ⅜"
Suction Valve Size (“O.D.) ⅞"
Valve Type Sweat
Refrigerant Charge 181
Electrical Data
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity 33.3
Max. Overcurrent Protection 50
Min / Max Volts 197/253
Electrical Conduit Size ½" or ¾"
Equipment Weight (lbs) 260
Ship Weight (lbs) 282



Standard Features
• Energy-Efficient Compressor
• Copper tube/ enhanced aluminum fin coil-5mm diameter on 1.5-4.0T
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)



Standard Features 

• Heavy-duty aluminized-steel dual- diameter tubular heat exchanger
• Single-stage gas valve
• Durable Hot-surface igniter
• Quiet, single-speed draft induced
• Self-diagnostic control board
• Color-coded low-voltage terminals
• Multi-speed ECM blower motor
• California Low NOx emissions models available
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed

Cabinet Features

• Installation:
– GM9S80-upflow, horizontal left or right
– GC9S80- downflow, horizontal left or right
• Convenient left or right connection
for gas and electrical service
• Heavy-gauge steel cabinet with
durable baked-enamel finish
• Foil faced insulated heat exchanger 



Standard Features

• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed

California Residents- Proposition 65 Warning


Scroll to Top