Start The Year Off With Huge Saving On Goodman's Seer2 Split Systems!


3 Ton 14.5 SEER2 80% 80 kbtu Horizontal Goodman AC Gas Furnace System GSXN40361 + CHPTA3630B4 + GM9S800803BN


Standard Features
• Energy-Efficient Compressor
• Copper tube/ enhanced aluminum fin coil-5mm diameter on 1.5-4.0T
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)



Standard Features 

• Heavy-duty aluminized-steel dual- diameter tubular heat exchanger
• Single-stage gas valve
• Durable Hot-surface igniter
• Quiet, single-speed draft induced
• Self-diagnostic control board
• Color-coded low-voltage terminals
• Multi-speed ECM blower motor
• California Low NOx emissions models available
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
• AHRI Certified; ETL Listed

Cabinet Features

• Installation:
– GM9S80-upflow, horizontal left or right
– GC9S80- downflow, horizontal left or right
• Convenient left or right connection for gas and electrical service
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Foil faced insulated heat exchanger 



Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT, CAPTA, CHPT, CHPTA models feature factory-installed thermal expansion valves for cooling and heat pump applications
• CAPF, CAPFA, CAUF, CAUFA, CHPF, CSCF models feature a check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21” depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed

GM9S800803BN GSXN403610 CHPTA3630B4
Heating Capacity Capacities Unit Dimensions
Input 80,000 Nominal Cooling (BTU/h) 36,000 W 30"
Natural Gas Output 64,000 Decibels (dBA) 72 D 21"
LP Gas Output 64,000 Compressor H 17½"
AFUE ¹ 80 RLA 16 Nominal Tons 3
Available AC @ 0.5” ESP 3 LRA 91.9
Temperature Rise Range (°F) 35-65 Stage Single Connection
Circulator Blower Type Scroll Liquid ⅜”
Size  (D x W) 10" x 8" Condenser Fan Motor Suction ⅞"
Horsepower @1075 RPM 0.5 Motor Type PSC Ship Weight (lbs) 66
Speed 9 Horsepower
Vent Diameter ² 4" FLA 0.95
No. of Burners 4 Refrigeration System
Electrical Data Refrigerant Line Size
Min. Circuit Ampacity 8.7 Liquid Line Size (“O.D.) ⅜"
Max. Overcurrent Device (amps) 15 Suction Line Size (“O.D.) ⅞"
Ship Weight (lbs) 116 Refrigerant Connection Size
Liquid Valve Size (“O.D.) ⅜"
Suction Valve Size (“O.D.) ⅞"
Valve Type Sweat
Refrigerant Charge 95
Electrical Data
Voltage-Phase (60 Hz) 208/230-1
Minimum Circuit Ampacity 21
Max. Overcurrent Protection 35
Min / Max Volts 197/253
Electrical Conduit Size ½" or ¾"
Equipment Weight (lbs) 188
Ship Weight (lbs) 210
Scroll to Top